-19 %
THIS IS A TEST SITE, IF YOU ARE HERE BY MISTAKE PLEASE GO TO OUR REAL SITE: WWW.HTA3D.COM
Prusa i3 Printed Parts
-30 %
HTA3D
Single Extruder - optimized for flexible filament - Mk8 and V6
Based
on:
http://www.thingiverse.com/thing:1208307
Improvements:&n..
55.99€ 38.99€
Ex Tax:32.22€
-24 %
This extruder will be sent assembled, if you want to buy the loose components to assemble it yourself you can do it in this link.Main Features:Extreme..
99.00€ 74.99€
Ex Tax:61.98€
-25 %
KIT KOSSEL PLA+ABS PRINTED PARTS
Based on: http://reprap.org/wiki/Kossel
This kit is printed pieces following ..
39.99€ 29.99€
Ex Tax:24.79€
-10 %
L3k Improved new Greg's Wade Extruder Based on: https://github.com/lautr3k/Wade-L3K http://www.thingiverse.com/thing:512338 ..
15.00€ 13.49€
Ex Tax:11.15€
-20 %
Printed part for the electronics that the 3DSteel printer carries. Protects and assembles in the structure in an easy and safe way.All the electronic ..
7.50€ 6.00€
Ex Tax:4.96€
-20 %
Printed protective part for the 33A power supply used by the 3DSteel printer.You can make the connections of the power supply and then place the print..
7.50€ 6.00€
Ex Tax:4.96€
-23 %
Based on: https://www.thingiverse.com/thing:2228901
Extruder kit content (configurable):
Hotend Chimera style. Equipped with f..
95.00€ 73.50€
Ex Tax:60.74€
Recommended
-39 %
Main Features:Pre-assembled kit without weldsFast and very easy assembly, which does not require knowledge of electronics or mechanics.We have simplif..
650.00€ 399.00€
Ex Tax:329.75€
-48 %
DUAL P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the
P3STEEL redesigned by HTA3D.Due to its performance this ..
530.00€ 275.00€
Ex Tax:227.27€
-46 %
P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the
P3STEEL redesigned by HTA3D.Due to its performance this is th..
475.00€ 255.00€
Ex Tax:210.74€
Only a few units in stock
-37 %
Prusa i3 Rework – DIY Kit
This kit includes all the needed components for the construction
of Prusa I3 Rework.
Based on:
http://repra..
350.00€ 220.00€
Ex Tax:181.82€
Hot Sales
-22 %
Thermal Insulation for Heated Bed It is composed of 3 layers:Aluminium that acts as a thermal refractory.Air chamber to avoid thermal conduction...
2.50€ 1.95€
Ex Tax:1.61€
Hot Sales
-67 %
Polyimide tape BGA, electrically insulating and heat resistant. Dimensions: 15mmx33m High heat resistance: 280°C Adhesive silicone prot..
4.65€ 1.55€
Ex Tax:1.28€
Hot Sales
Only a few units in stock
-78 %
Thermistor ideal for the Heated Bed or Hotend. 100K ohm NTC 3950 1m wire with dupont connector1 Piece..
3.20€ 0.69€
Ex Tax:0.57€
Hot Sales
-69 %
Heater TN2F 12V 40W Power: 40W Material: Stainless Steel Core: Ceramic Diameter: 6mm approx. Length: 20mm approx. Cable..
3.20€ 0.99€
Ex Tax:0.82€
-10 %
L3k Improved new Greg's Wade Extruder Based on: https://github.com/lautr3k/Wade-L3K http://www.thingiverse.com/thing:512338 ..
15.00€ 13.49€
Ex Tax:11.15€
Hot Sales
-92 %
It is used to connect hotends and extruders to teflon tube. On one side it has a thread of 1/8" and on the other a teflon tube connector of 4mm d..
4.99€ 0.39€
Ex Tax:0.32€
-68 %
These nozzles perform the function of extrusion of melted plastic in 3D printing process. They are compatible with our hotends and popular V5, V6..
3.99€ 1.29€
Ex Tax:1.07€
Hot Sales
-68 %
Bearings 608zz standard, which are used in printers in the extruder “Greg’s wade” and its derivatives, and also used for the tensors in X-axis and Y-a..
0.99€ 0.32€
Ex Tax:0.26€
Hot Sales
-69 %
623zz bearings used in printers mainly for X and Y axes.
Nominal dimensions:
Inside diameter: 3mm
Outside diameter: 10mm&..
0.93€ 0.29€
Ex Tax:0.24€
-57 %
Belt GT2 for reprap, made of neoprene with reinforcerd fiberglass. Belt: Width: 6mm Step: 2mm Belt heigh: 1.38 mm Teeth heigh..
12.98€ 5.60€
Ex Tax:4.63€
-62 %
Coupler Shaft from 5mm to 5mm, commonly used for Z axis. Material: Aluminium Input and Output: 5mm Lenght: 25 mm Diameter: 2..
2.99€ 1.15€
Ex Tax:0.95€
-35 %
ITOPIE PRINTED PARTS KIT
Basado en: http://reprap.org/wiki/ITopie
Components:
-Extruder (3mm/ 1.75mm)
-Extruder..
24.00€ 15.50€
Ex Tax:12.81€
-65 %
Rigid Coupler Shaft from 5mm to 5mm, commonly used for Z axis. Material: Aluminium Input and Output: 5mm Lenght: 25 mm Diame..
2.75€ 0.95€
Ex Tax:0.79€
Check out this bundle
It includes the printed parts, bearings, couplers, hobbed bolt, special screws, belts and pulleys of this popular design..
