-23 %
Stock: In Stock
Model: HTA3D-DUAL-EXTRUDER
Based on: https://www.thingiverse.com/thing:2228901
Extruder kit content (configurable):
Hotend Chimera style. Equipped with fan 3010,2x 40w heating cartridges, 2x NTC 100kΩ thermistors, Teflon tube and 4 BSP connectors PC04-1
2x Motors Nema 17 - length 40mm - with 1..
95.00€ 73.50€
Ex Tax:60.74€
-34 %
Stock: In Stock
Model: 3010-v6-12v
3010 fan with
Injection Moulded Fan Duct
Fan Specifications 3010
Size: 30x30x10mm
7 blades
Connector: pH
Nominal Current: 0.08 ± 10% Amp
Rated Voltage: cc: 12 V
Noise: 24±10% dBA
Fan Speed: 7000±10% RPM
Ai..
4.49€ 2.95€
Ex Tax:2.44€
-50 %
Stock: In Stock
Model: Airtripper Bowden BSP
Composition:
-Printed parts (ABS)
-MK8
Drive Gear
-Bearings:
1 x 608zz
1 x MR105ZZ
-Hardware:
4 x M3 Washers
4 x M3 Nuts
1 x M3 25mm
2 x M3 30mm
1 x M3 6mm
..
16.93€ 8.50€
Ex Tax:7.02€
-36 %
Out of Stock
Stock: Out of Stock
Model: Hotend-V5-1.75mm
Advantages: It can print any material: From PLA, due to it thermical barrier made of stainless steel and its dissipation with forced ventilation, to Nylon, Polycarbonate, Polyoxymethylene y others thermoplastics which need higher temperatures. And also, as it is natural, it can print ..
32.95€ 21.00€
Ex Tax:17.36€
-36 %
Out of Stock
Stock: Out of Stock
Model: Hotend-V5-3mm
Advantages: It can print any material: From PLA, due to it thermical barrier made of stainless steel and its dissipation with forced ventilation, to Nylon, Polycarbonate, Polyoxymethylene y others thermoplastics which need higher temperatures. And also, as it is natural, it can print ..
32.95€ 21.00€
Ex Tax:17.36€
-68 %
Stock: In Stock
Model: Hotend-V6-1.75mm
Advantages:
It can print any material: From PLA, due to it thermical
barrier made of stainless steel and its dissipation with
forced ventilation, to Nylon, Polycarbonate, Polyoxymethylene y
others thermoplastics which need higher temperatures. And also, as
it is natural..
59.95€ 18.95€
Ex Tax:15.66€
-69 %
Stock: In Stock
Model: Hotend-V6-1.75-PT100Termistor
The main advantage of this Hotend with respect to the conventional V6 is the change of the heating block and thermistor.It is an encapsulated thermistor, which makes it more resistant to deterioration and breakage.Also, as an insulator, use a silicone sock specially adapted for the heating block. Th..
69.99€ 21.50€
Ex Tax:17.77€
New
-65 %
Stock: In Stock
Model: Teflón-4-2-negro
This teflon tube stands out from others due to lower friction and tighter and more precise tolerances.Features: It is made of polytetrafluoroethylene resin by pressing.Excellent resistance to high and low temperatures: it is not affected by the temperature change, having a wide temperature rang..
0.40€ 0.14€
Ex Tax:0.12€
Hot Sales
-65 %
Out of Stock
Stock: Out of Stock
Model: Teflón-4-2-azul
This teflon tube stands out from others due to lower friction and tighter and more precise tolerances.Features: It is made of polytetrafluoroethylene resin by pressing.Excellent resistance to high and low temperatures: it is not affected by the temperature change, having a wide temperature rang..
0.40€ 0.14€
Ex Tax:0.12€
Only a few units in stock
-8 %
Stock: In Stock
Model: Multi-color Bowden extruder
This hotend is a simple solution to print parts in two colors or different materials without the characteristic problems of the dual nozzles, such as stains and lags in printing. All material is extruded by the same nozzle, so there are no lags and calibration is simpler and more stable.The Gcode mu..
40.00€ 36.99€
Ex Tax:30.57€
Only a few units in stock
-10 %
Stock: In Stock
Model: Hotend 2 in 1 mix
This hotend is a simple solution to print parts in two colors or different materials without the characteristic problems of the dual nozzles, such as stains and lags in printing. All material is extruded by the same nozzle, so there are no lags and calibration is simpler and more stable.This version..
44.50€ 39.99€
Ex Tax:33.05€
New
-57 %
Stock: In Stock
Model: Brass-V6-Heater-Block-PT100
This material is more resistant and has a higher thermal inertia, so we can tighten the nozzle more without passing the thread, and having a higher thermal inertia the temperature will remain much more stable during printing.The v6 Heater Block has been upgraded to clamp both the
heater cartridge a..
14.00€ 5.99€
Ex Tax:4.95€