Menu
Your Cart
THIS IS A TEST SITE, IF YOU ARE HERE BY MISTAKE PLEASE GO TO OUR REAL SITE: WWW.HTA3D.COM

Printed part for 3DSteel electronics

Printed part for 3DSteel electronics
Printed part for 3DSteel electronics
-20 %
Printed part for 3DSteel electronics
Printed part for 3DSteel electronics
Printed part for 3DSteel electronics
Personalized Product
This product is prepared according to the customer requirements, thus, the handling time is between 24 and 72 hours approximately.
1 reviews - Write a review
7.50€
6.00€
Ex Tax: 4.96€
  • Stock: 84
  • Model: CajaRamps-3DSteel

Available Options

Add to Cart
Buy Now
Add to Wish List Compare this Product
Fast shipping from Spain
24-hour delivery and free shipping available in mainland Spain.
Stock on hand
Shipped quickly from Spain, with a full VAT invoice.
Secure & flexible payment
Pay by card, PayPal or bank transfer.
Expert technical support
Over 10 years helping customers with components and compatibility.

Printed part for the electronics that the 3DSteel printer carries. Protects and assembles in the structure in an easy and safe way.

All the electronic components remain inside and have space to lodge in an orderly manner the excess cable in case of needed.

Material: PLA 3D850.


You can optionally add the hardware kit, which includes:

  • M3x8: 2 units
  • M3x12: 4 units
  • M5x10: 4 units
  • M3 nut: 2 units

Write a review

Note: HTML is not translated!
Bad Good
Tags: boards, electronic
Quickview
25A Mosfet Module with heatsink and hot bed compatible 25A Mosfet Module with heatsink and hot bed compatible
-57 % Out of Stock
25A Mosfet Module with heatsink and hot bed compatible
You can control the current of devices or accessories, such as a hot bed, or different heaters:Maximum current: 25AVoltage: 12 / 24V 1 Piece..
14.00€ 5.99€ Ex Tax:4.95€
Add to Cart
Add to Wish List Compare this Product
Quickview
30A Mosfet Module with heatsink and hot bed compatible 30A Mosfet Module with heatsink and hot bed compatible
-40 % Out of Stock
30A Mosfet Module with heatsink and hot bed compatible
You can control the current of devices or accessories, such as a hot bed, or different heaters:Maximum current: 30AVoltage: 5 / 12 / 24V 1 Piece..
25.00€ 14.95€ Ex Tax:12.36€
Add to Cart
Add to Wish List Compare this Product
Quickview
CNC Shield Expansion Board for Arduino UNO V3 CNC Shield Expansion Board for Arduino UNO V3
-48 % Out of Stock
CNC Shield Expansion Board for Arduino UNO V3
Shield for Arduino UNO and other compatible boards, it is used to control CNC machines as plotters, laser engravers, milling machines, etc. 1 Piece wi..
4.95€ 2.59€ Ex Tax:2.14€
Add to Cart
Add to Wish List Compare this Product
Quickview
FYSETC Cheetah Board with TMC integrated - 32 bits 24v FYSETC Cheetah Board with TMC integrated - 32 bits 24v
New -13 %
FYSETC Cheetah Board with TMC integrated - 32 bits 24v
Current Version: V1.2bDesigned for a single extruder 3D printer. Many interfaces are reserved for features such as AC detection, filament detection, l..
40.00€ 34.99€ Ex Tax:28.92€
Add to Cart
Add to Wish List Compare this Product
Quickview
Mega 2560 R3 (Compatible)
-28 % Out of Stock
Mega 2560 R3 (Compatible)
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 .It has 54 digital input/output pins (of which 15 can be used as PW..
17.99€ 12.95€ Ex Tax:10.70€
Add to Cart
Add to Wish List Compare this Product
Quickview
Mega 2560 R3 (Compatible) 16u2
Only a few units in stock -40 %
Mega 2560 R3 (Compatible) 16u2
Mega 2560 R3 (Compatible) 16u2This is a clone of quality, not only just aesthetically , also uses the same chip USB connection so it is 100 % compatib..
24.99€ 14.95€ Ex Tax:12.36€
Add to Cart
Add to Wish List Compare this Product
Quickview
6010 Fan - 12v 6010 Fan - 12v
-63 %
6010 Fan - 12v
Fan Specifications 6010 Size: 60x10mm 11 Blades Connector: XH2.54-2P Nominal current: 0.16 ± 10% Amp Rated Voltage: DC12..
5.45€ 1.99€ Ex Tax:1.64€
Add to Cart
Add to Wish List Compare this Product
Quickview
Bowden Connector BSP PC04-1 for 1.75mm filament
Hot Sales -92 %
Bowden Connector BSP PC04-1 for 1.75mm filament
It is used to connect hotends and extruders to teflon tube. On one side it has a thread of 1/8" and on the other a teflon tube connector of 4mm d..
4.99€ 0.39€ Ex Tax:0.32€
Add to Cart
Add to Wish List Compare this Product
Quickview
Extruder Nozzle 1.75mm 0.20mm to 1.00mm Extruder Nozzle 1.75mm 0.20mm to 1.00mm
Hot Sales -68 %
Extruder Nozzle 1.75mm 0.20mm to 1.00mm
These nozzles perform the function of extrusion of melted plastic in 3D printing process. They are compatible with our hotends and popular V5, V6..
3.99€ 1.29€ Ex Tax:1.07€
Add to Cart
Add to Wish List Compare this Product
Quickview
Set of double traction drive gears for extruder - Bondtech style - Compatible with Mk2 / Mk3 type extruders Set of double traction drive gears for extruder - Bondtech style - Compatible with Mk2 / Mk3 type extruders
-86 %
Set of double traction drive gears for extruder - Bondtech style - Compatible with Mk2 / Mk3 type extruders
Double pulleys for bondtech extruders, this filament thrust system has proven to be one of the most powerful and reliable. By exerting force on the fi..
55.00€ 7.85€ Ex Tax:6.49€
Add to Cart
Add to Wish List Compare this Product
Quickview
Insulator Sock for heating block V6 - Version with PT100 thermistor Insulator Sock for heating block V6 - Version with PT100 thermistor
-68 % Out of Stock
Insulator Sock for heating block V6 - Version with PT100 thermistor
Silicone sock for the V6 heating block, its main advantages that keeps the nozzle clean and helps maintain temperature.Features:Manufactured from a no..
4.50€ 1.45€ Ex Tax:1.20€
Add to Cart
Add to Wish List Compare this Product
Quickview
Mechanical Enstop with wheel and 1m of cable Mechanical Enstop with wheel and 1m of cable
-65 % Out of Stock
Mechanical Enstop with wheel and 1m of cable
Limit switch with wheel, 1 meter cable and 3-pin connector 1 Piece..
4.00€ 1.39€ Ex Tax:1.15€
Add to Cart
Add to Wish List Compare this Product
Quickview
Nuts and Bolts for HTA3D v2 Extruder Nuts and Bolts for HTA3D v2 Extruder
Nuts and Bolts for HTA3D v2 Extruder
Bolts:3x M3x84x M3x124x M3x141x M3x164x M3x206x M3x351x M3x40 - with a coil and 2 washers4x M4x25Nuts: 4x M34x M4..
2.50€ Ex Tax:2.07€
Add to Cart
Add to Wish List Compare this Product
Quickview
Schuko CEE7 to IEC PC Power Cable Lead Schuko CEE7 to IEC PC Power Cable Lead
-63 %
Schuko CEE7 to IEC PC Power Cable Lead
3 wiresConector 1 : Schuko 250v 10AConector 2: IEC 60320 C13Max Voltage: 250V Max Power: 2500W ..
4.79€ 1.79€ Ex Tax:1.48€
Add to Cart
Add to Wish List Compare this Product
Quickview
Compact Power Supply - DC 12V 33A - 400W Compact Power Supply - DC 12V 33A - 400W
Only a few units in stock -52 %
Compact Power Supply - DC 12V 33A - 400W
A powerful power supply, capable of supplying any 3D printer with complete stability, thanks to its 33-amp is powering the most demanding configu..
38.50€ 18.45€ Ex Tax:15.25€
Add to Cart
Add to Wish List Compare this Product
Quickview
Socket with switch for power supply
-36 % 5 - 10 Days
Socket with switch for power supply
Power socket with switch. You can directly connect the power cable (IEC 60320 C13) without the need of welding, with the convenience of being able to ..
3.03€ 1.95€ Ex Tax:1.61€
Add to Cart
Add to Wish List Compare this Product
Quickview
Cable 12AWG to connect the power supply y RAMPS
-21 %
Cable 12AWG to connect the power supply y RAMPS
Red and black wires to power the RAMPS from the power supply.It is a tinned copper cable resistant to high temperatures. With silicone protection, it ..
3.50€ 2.75€ Ex Tax:2.27€
Add to Cart
Add to Wish List Compare this Product
Quickview
Bipolar expansion cable for fans
-16 %
Bipolar expansion cable for fans
Bipolar extension cable for fans.One of the ends is crimped for the connection in the power supply or electronics and the other has welded a connector..
1.90€ 1.60€ Ex Tax:1.32€
Add to Cart
Add to Wish List Compare this Product
Quickview
Cable 16AWG to connect the heated bed to the electronics
-25 % 5 - 10 Days
Cable 16AWG to connect the heated bed to the electronics
Red and black wires for the heated bed. Red and black cables for the heated bed. One end of each cable has a connector crimped for the connection to t..
3.00€ 2.25€ Ex Tax:1.86€
Add to Cart
Add to Wish List Compare this Product
Check out this bundle
Electronic kit: Printed Box + Mega 2560 R3 + RAMPS 1.6+ + TMC2130 v2 SPI + 6010 Fan
This kit includes the components of the 3DSteel printer electronics. The printed piece is designed to fit in our frame, but will fit most...
Printed part for 3DSteel electronics
Printed part for 3DSteel electronics
6.00€
+
Mega 2560 R3 (Compatible) 16u2
Mega 2560 R3 (Compatible) 16u2
14.95€
+
Ramps 1.6+ (PLUS) - Compatible with SPI - Compatible with TMC2130
Ramps 1.6+ (PLUS) - Compatible with SPI - Compatible with TMC2130
11.95€
+
4x
TMC2130 - Welded for SPI - Stepper motor controller Silent - Driver
TMC2130 - Welded for SPI - Stepper motor controller Silent - Driver
8.75€
+
6010 Fan - 12v
6010 Fan - 12v
1.99€
Bundle price: 67.79€
You save 2.10€!

Add bundle to Cart
Components to update the electronics to 3DSteel - RAMPS 1.6+ and TMC2130 v2 SPI
This kit includes the components of the electronics to update the electronics according to the 3DSteel printer from our P3Steel printer...
Printed part for 3DSteel electronics
Printed part for 3DSteel electronics
6.00€
+
Ramps 1.6+ (PLUS) - Compatible with SPI - Compatible with TMC2130
Ramps 1.6+ (PLUS) - Compatible with SPI - Compatible with TMC2130
11.95€
+
4x
TMC2130 - Welded for SPI - Stepper motor controller Silent - Driver
TMC2130 - Welded for SPI - Stepper motor controller Silent - Driver
8.75€
Bundle price: 51.36€
You save 1.59€!

Add bundle to Cart

Related Posts

18 Jul How to update the firmware with Marlin 2.0 in 3DSteel (Evolution of P3Steel) with Arduino IDE or using .HEX files
Juan J 2 5952
How to update the firmware with Marlin 2.0 in 3DSteel (Evolution of P3Steel) with Arduino IDE or using .HEX files
Marlin 2.0 is now available. And, although it is still in the "beta" phase, in RAMPS it is stable enough to be used, and it has many important advantages over versions 1.1.X. These include:Complete compatibility with TM2130, including menus to adjust the intensity, operating mode, sensitivity for sensorless homing, etc.Improved acceleration and mov..
Read More
15 Jul P3Steel update tutorial > 3DSteel
Juan J 5 4609
P3Steel update tutorial > 3DSteel
We have based our new 3DSteel model on the popular P3Steel kit, keeping the same frame and rods, as well as many other components to allow the upgrade to this new version.We have prepared different packs, so you can make a total or partial update with the greatest comfort and flexibility possible. Next, you will find the different parts that you ca..
Read More