Menu
Your Cart
THIS IS A TEST SITE, IF YOU ARE HERE BY MISTAKE PLEASE GO TO OUR REAL SITE: WWW.HTA3D.COM

HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style

HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
-23 %
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style
4 reviews - Write a review
95.00€
73.50€
Ex Tax: 60.74€
  • Stock: 69
  • Model: HTA3D-DUAL-EXTRUDER
HTA3D HTA3D

Available Options

Add to Cart
Buy Now
Add to Wish List Compare this Product
Fast shipping from Spain
24-hour delivery and free shipping available in mainland Spain.
Stock on hand
Shipped quickly from Spain, with a full VAT invoice.
Secure & flexible payment
Pay by card, PayPal or bank transfer.
Expert technical support
Over 10 years helping customers with components and compatibility.

Based on: https://www.thingiverse.com/thing:2228901

 

Extruder kit content (configurable):

  • Hotend Chimera style. Equipped with fan 3010,2x 40w heating cartridges, 2x NTC 100kΩ thermistors, Teflon tube and 4 BSP connectors PC04-1
  • 2x Motors Nema 17 - length 40mm - with 1m cable and dupont connector
  • Printed Parts
    • Extruders left and right, X carriage, Hotend support, Layer Fan support, X limit switch support and mosfet module support.
  •  2x Mk8 pulley 1.75m
  • 2x 608zz y 2x mr105zz bearings
  • Screws:
    • 3x M3x8
    • 2x M3x12
    • 3x M3x16
    • 4x M3x20
    • 6x M3x25
    • 4x M3x35 - Con muelle y arandelas.
    • 4x M4x25
    • 2x M8x20
  • Nuts:
    • 6x M3
    • 4x M4

Extra:

  • Additional mosfet module
    • Adds an additional mosfet module to control the layer fan in Ramps 1.4
  • Layer fan
    • Adds a 4020 layer fan that is used to cool the part while printing.

Write a review

Note: HTML is not translated!
Bad Good
Tags: Assembled Extruders, Extruder,
Quickview
Airtripper Bowden Extruder BSP Edition for 1.75mm flament Airtripper Bowden Extruder BSP Edition for 1.75mm flament
-50 %
Airtripper Bowden Extruder BSP Edition for 1.75mm flament
Composition:  -Printed parts (ABS)  -MK8 Drive Gear  -Bearings:  1 x 608zz  1 x MR105ZZ  -Hardwa..
16.93€ 8.50€ Ex Tax:7.02€
Add to Cart
Add to Wish List Compare this Product
Quickview
HTA3D Single Extruder - optimized for flexible filament - Mk8 and V6 HTA3D Single Extruder - optimized for flexible filament - Mk8 and V6
-30 %
HTA3D Single Extruder - optimized for flexible filament - Mk8 and V6
HTA3D Single Extruder - optimized for flexible filament - Mk8 and V6 Based on:  http://www.thingiverse.com/thing:1208307 Improvements:&n..
55.99€ 38.99€ Ex Tax:32.22€
Add to Cart
Add to Wish List Compare this Product
Quickview
HTA3D V2 Extruder - Optimized for flexible filaments - Dual pulleys - Automatic leveling with 3DTouch HTA3D V2 Extruder - Optimized for flexible filaments - Dual pulleys - Automatic leveling with 3DTouch
-24 %
HTA3D V2 Extruder - Optimized for flexible filaments - Dual pulleys - Automatic leveling with 3DTouch
This extruder will be sent assembled, if you want to buy the loose components to assemble it yourself you can do it in this link.Main Features:Extreme..
99.00€ 74.99€ Ex Tax:61.98€
Add to Cart
Add to Wish List Compare this Product
Quickview
L3K Extruder L3K Extruder
-10 %
L3K Extruder
L3k Improved new Greg's Wade Extruder Based on:   https://github.com/lautr3k/Wade-L3K http://www.thingiverse.com/thing:512338 ..
15.00€ 13.49€ Ex Tax:11.15€
Add to Cart
Add to Wish List Compare this Product
Quickview
3DSteel - 3D Printer - Evolution of P3Steel / Prusa i3 Steel 3DSteel - 3D Printer - Evolution of P3Steel / Prusa i3 Steel
Recommended -39 %
3DSteel - 3D Printer - Evolution of P3Steel / Prusa i3 Steel
Main Features:Pre-assembled kit without weldsFast and very easy assembly, which does not require knowledge of electronics or mechanics.We have simplif..
650.00€ 399.00€ Ex Tax:329.75€
Add to Cart
Add to Wish List Compare this Product
Quickview
DUAL P3STEEL by HTA3D - DIY Kit DUAL P3STEEL by HTA3D - DIY Kit
-48 %
DUAL P3STEEL by HTA3D - DIY Kit
DUAL P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the P3STEEL redesigned by HTA3D.Due to its performance this ..
530.00€ 275.00€ Ex Tax:227.27€
Add to Cart
Add to Wish List Compare this Product
Quickview
P3STEEL by HTA3D - DIY Kit P3STEEL by HTA3D - DIY Kit
-46 %
P3STEEL by HTA3D - DIY Kit
P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the P3STEEL redesigned by HTA3D.Due to its performance this is th..
475.00€ 255.00€ Ex Tax:210.74€
Add to Cart
Add to Wish List Compare this Product
Quickview
Prusa i3 Rework - DIY Custom Kit Prusa i3 Rework - DIY Custom Kit
Only a few units in stock -37 %
Prusa i3 Rework - DIY Custom Kit
Prusa i3 Rework – DIY Kit This kit includes all the needed components for the construction of Prusa I3 Rework. Based on:  http://repra..
350.00€ 220.00€ Ex Tax:181.82€
Add to Cart
Add to Wish List Compare this Product
Quickview
Calibrated smooth rod diameter 10mm - Cut to size
Hot Sales -6 %
Calibrated smooth rod diameter 10mm - Cut to size
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never ..
2.40€ 2.25€ Ex Tax:1.86€
Add to Cart
Add to Wish List Compare this Product
Quickview
5x8 Zcoupler - Flexible coupler 5x8 Zcoupler - Flexible coupler
Hot Sales -62 %
5x8 Zcoupler - Flexible coupler
Coupler Shaft from 5mm to 8mm, commonly used for Z axis. Material: Aluminium Input: 5mm Output:  8mm Lenght: 25 mm Diame..
2.99€ 1.15€ Ex Tax:0.95€
Add to Cart
Add to Wish List Compare this Product
Quickview
MK2B HeatBed 200x200mm 12v / 24v - Red or black MK2B HeatBed 200x200mm 12v / 24v - Red or black
-62 %
MK2B HeatBed 200x200mm 12v / 24v - Red or black
The hot bed is responsible for heating the bottom of the 3D printer, so that the pieces remain adhered during printing.Thus the warping (parts bulge..
17.99€ 6.80€ Ex Tax:5.62€
Add to Cart
Add to Wish List Compare this Product
Quickview
Nema 17 Stepper Motor - 17hs4401 - 5mm D Shaft Nema 17 Stepper Motor - 17hs4401 - 5mm D Shaft
Hot Sales -49 % Out of Stock
Nema 17 Stepper Motor - 17hs4401 - 5mm D Shaft
Features:17HS4401: Compact and powerful, ideal for 3D printers in medium size, and also for small CNC machines and robotics in general. This one is th..
15.75€ 7.99€ Ex Tax:6.60€
Add to Cart
Add to Wish List Compare this Product
Quickview
Thermistor 100K ohm NTC 3950 wired Thermistor 100K ohm NTC 3950 wired
Hot Sales Only a few units in stock -78 %
Thermistor 100K ohm NTC 3950 wired
Thermistor ideal for the Heated Bed or Hotend. 100K ohm NTC 3950 1m wire with dupont connector1 Piece..
3.20€ 0.69€ Ex Tax:0.57€
Add to Cart
Add to Wish List Compare this Product
Quickview
Borosilicate tempered glass 213x200x3mm Borosilicate tempered glass 213x200x3mm
Hot Sales Only a few units in stock -65 %
Borosilicate tempered glass 213x200x3mm
The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to the..
12.99€ 4.50€ Ex Tax:3.72€
Add to Cart
Add to Wish List Compare this Product
Quickview
Thermal Insulation for Heated Bed
Hot Sales -22 %
Thermal Insulation for Heated Bed
Thermal Insulation for Heated Bed It is composed of 3 layers:Aluminium that acts as a thermal refractory.Air chamber to avoid thermal conduction...
2.50€ 1.95€ Ex Tax:1.61€
Add to Cart
Add to Wish List Compare this Product
Quickview
PLA Filament Easy Printing - 1,75mm - Materials 3D / WINKLE - 1kg - Ingeo 3D850
Hot Sales -14 %
PLA Filament Easy Printing - 1,75mm - Materials 3D / WINKLE - 1kg - Ingeo 3D850
CHARACTERISTICS:  Filament based on PLA Ingeo 3D850. Its main features are its ease of printing and ceramic finish. It is suitable for ..
9.00€ 7.75€ Ex Tax:6.41€
Add to Cart
Add to Wish List Compare this Product
Quickview
MK8 for 1,75mm filament MK8 for 1,75mm filament
-74 %
MK8 for 1,75mm filament
These precision pulleys are designed especially for the extrusion of the filament, its tiny teeth always guarantee a steady grip. Material: ..
3.45€ 0.89€ Ex Tax:0.74€
Add to Cart
Add to Wish List Compare this Product
Quickview
HTA3D Single Extruder - optimized for flexible filament - Mk8 and V6 HTA3D Single Extruder - optimized for flexible filament - Mk8 and V6
-30 %
HTA3D Single Extruder - optimized for flexible filament - Mk8 and V6
HTA3D Single Extruder - optimized for flexible filament - Mk8 and V6 Based on:  http://www.thingiverse.com/thing:1208307 Improvements:&n..
55.99€ 38.99€ Ex Tax:32.22€
Add to Cart
Add to Wish List Compare this Product
Quickview
P3Steel / Prusa I3 Steel Frame - Galvanized / Stainless P3Steel / Prusa I3 Steel Frame - Galvanized / Stainless
-16 %
P3Steel / Prusa I3 Steel Frame - Galvanized / Stainless
1. GALVANIZED STEEL FRAME (3MM): Laser cutting of a high-quality galvanized steel sheet, according to our redesign, with the following improvement..
70.00€ 59.00€ Ex Tax:48.76€
Add to Cart
Add to Wish List Compare this Product
Quickview
V6 Dual Hotend - Chimera Style - 1.75mm filament V6 Dual Hotend - Chimera Style - 1.75mm filament
-70 %
V6 Dual Hotend - Chimera Style - 1.75mm filament
V6 Dual Hotend compatible with bowden system Features: Compatible with V6 components, such as nozzles and heater block. It can be confi..
96.80€ 28.99€ Ex Tax:23.96€
Add to Cart
Add to Wish List Compare this Product
Quickview
V6 Dual Hotend - Chimera Style - 1.75mm filament - Only metal parts V6 Dual Hotend - Chimera Style - 1.75mm filament - Only metal parts
-69 %
V6 Dual Hotend - Chimera Style - 1.75mm filament - Only metal parts
V6 Dual Hotend compatible with bowden system Features: Compatible with V6 components, such as nozzles and heater block. It can be confi..
84.70€ 26.50€ Ex Tax:21.90€
Add to Cart
Add to Wish List Compare this Product
Quickview
DUAL P3STEEL by HTA3D - DIY Kit DUAL P3STEEL by HTA3D - DIY Kit
-48 %
DUAL P3STEEL by HTA3D - DIY Kit
DUAL P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the P3STEEL redesigned by HTA3D.Due to its performance this ..
530.00€ 275.00€ Ex Tax:227.27€
Add to Cart
Add to Wish List Compare this Product

Related Posts

14 Sep How to Change the Nozzle
Fátima 0 3239
How to Change the Nozzle
Our 3D printer, as every machine, needs a maintenance. One of the most basic ones is the change of the nozzle of our hotend. We may need to change it for several reasons, as for example, needing a smaller or bigger diameter (as bigger diameters are better for resistent parts with few details and fast printings and small diameters are better for sma..
Read More
17 Jan New Step by Step P3steel Tutorials
Fátima 0 3060
New Step by Step P3steel Tutorials
We have created new step-by-step tutorials for the assembly of our P3steel, which makes it easier to keep the printer's assembly instructions updated.    The format of the tutorial is very visual and detailed, and are explained with precision the assembly of each component.    With this tutorial we intend to update the documentation and suppo..
Read More