Stock: In Stock
Model: Muelle-01
The springs are used in 3D printers for different reasons, the main one is for elements that require a certain pressure, such as the extruder tensioner. In this way, the tension adapts to the differences of the filament diameter.Also used for items that require adjustment, such as the heatedbed.Inne..
0.17€
Ex Tax:0.14€
New
-57 %
5 - 10 Days
Stock: 5 - 10 Days
Model: Espaciadores-MK52
Spacer set for the Prusa MK3 heated bed.It includes:9 units of 6x6x3 spacers9 M3 bolts1 allen wrench for screws..
7.00€ 2.99€
Ex Tax:2.47€
-71 %
Stock: In Stock
Model: P3Steel Dual HTA3D HardwareSet
Dual P3Steel by HTA3D Nuts and Bolts:
Screws:
M3x8 - 21 units
M3x12 - 69 units
M3x16 - 9 units
M3x20 - 8 units
M3x25 - 12 units
M3x30 - 4 units + 1 fully threaded
M3x35 - 4 units (with spring and 2 washers)
M4x6 - 4 units
M4x20 - 3 units
M4x25 - ..
20.00€ 5.75€
Ex Tax:4.75€
Stock: In Stock
Model: HTA3D-V2-Hardware-Set
Bolts:3x M3x84x M3x124x M3x141x M3x164x M3x206x M3x351x M3x40 - with a coil and 2 washers4x M4x25Nuts: 4x M34x M4..
2.50€
Ex Tax:2.07€
-73 %
Stock: In Stock
Model: P3Steel_HTA3D_HardwareSet
P3Steel by HTA3D Nuts and Bolts:Screws:M3x8 - 14 unitsM3x12 - 64 unitsM3x16 - 7 unitsM3x20 - 4 unitsM3x25 - 8 unitsM3x30 - 8 units + 1 fully threadedM3x35 - 1 unit (with spring and 2 washers)M4x6 - 4 unitsM4x20 - 3 unitsM4x25 - 9 un..
20.00€ 5.35€
Ex Tax:4.42€
-40 %
Stock: In Stock
Model: Prusa i3 Rework-Tornillería
Prusa i3 Rework Nuts and Bolts:
Bolts:
41 x M3x14
3 x M3x24
4 x M3x30
6 x M4x20
1 x M8x30
Washers:
53 x M3 (12 x DIN 9021)
6 x M8
34 x M10 (4 x DIN 9021)
Nuts:
33 x M3
..
20.00€ 12.00€
Ex Tax:9.92€
-38 %
Discontinued
Stock: Discontinued
Model: Wilson-Tornillería
WILSON NUTS AND BOLTSComposition: -51x M5x8-51x M5 T Slot Nuts -4x M5 T Slot Nuts (They can be inseted after the mounting)-2x M5 Nuts-7x M4x20 + 7x M4 Nuts-11x M3x10-24x M3x14 (Black and allen)-10x M3x30-18x M3 Nuts -13..
29.99€ 18.50€
Ex Tax:15.29€
-68 %
Stock: In Stock
Model: M8x60 DIN 913 ISO 4014 8.8
Hobbed Bolt for 3D printer, based on Reprap community design: http://reprap.org/wiki/Wade's_Geared_Extruder#The_Hobbed_Bolt
M8 x 60mm knurled at a standard meassure, 25mm from
the head of the bolt aproximately. This features are adapted to the
last versions of Greg's Wade extruder, ..
8.99€ 2.85€
Ex Tax:2.36€
-50 %
Stock: In Stock
Model: Special-Hardware-Set
Special Hardware Set:
2x M3x40 Partially threated bolts with
springsM8x20 setscrew for the extruder
idlerM3x10 setscrew small
gear2x M5nylon
nuts (in black or white) for Z axis. It is a great improvement, as nylon has an excelent abrasion resistance,
also provides a softe..
5.99€ 3.00€
Ex Tax:2.48€
Showing 1 to 9 of 9 (1 Pages)