-21 %
Stock: In Stock
Model: Cable-12AWG-70cm-01
Red and black wires to power the RAMPS from the power supply.It is a tinned copper cable resistant to high temperatures. With silicone protection, it is very flexible.One of the ends is welded to facilitate the introduction of the cable into the RAMPS connector.Length: 70cmSection: 3.31mm²Diameter: ..
3.50€ 2.75€
Ex Tax:2.27€
-25 %
5 - 10 Days
Stock: 5 - 10 Days
Model: Cable-16AWG-50cm-01
Red and black wires for the heated bed. Red and black cables for the heated bed. One end of each cable has a connector crimped for the connection to the Ramps.It is a tinned copper cable resistant to high temperatures. With silicone protection, it is very flexible.One of the ends is welded to facili..
3.00€ 2.25€
Ex Tax:1.86€
Only a few units in stock
-54 %
Stock: In Stock
Model: psu-12v10a120w
It is a small power supply, which can power a small 3D printer without hot bed, a plotter, a laser cutter, or any other CNC. It can also be used for LED lighting or general electronics.Compact size.Protections:ShortcircuitOverloadOvervoltageOvertemp protectionBuild-in EMI filter with 100% ..
20.00€ 9.20€
Ex Tax:7.60€
-56 %
Out of Stock
Stock: Out of Stock
Model: psu-12v15a180w
It is a small power supply, which can power a small 3D printer without hot bed, a plotter, a laser cutter, or any other CNC. It can also be used for LED lighting or general electronics.Compact size.Protections:ShortcircuitOverloadOvervoltageOvertemp protectionBuild-in EMI filter with 100% ..
28.00€ 12.45€
Ex Tax:10.29€
-50 %
Out of Stock
Stock: Out of Stock
Model: psu-12v20a250w
It is a small power supply, can power a small 3d printer with hot bed, a plotter, laser cutter, or any other CNC, can also be used for LED lighting or general electronics.Compact size.Protections:ShortcircuitOverloadOvervoltageOver temp protectionBuild-in EMI filter with 100% full load&nbs..
33.00€ 16.50€
Ex Tax:13.64€
Only a few units in stock
-52 %
Stock: In Stock
Model: PSU-12v33A
A powerful power supply, capable of supplying any 3D printer with complete stability, thanks to its 33-amp is powering the most demanding configurations, double extruder, simultaneous heating of the Heated Bed and the Extruder, etc.Compact size.Thoroughly tested in our printers, you can feed a ..
38.50€ 18.45€
Ex Tax:15.25€
Only a few units in stock
-44 %
Stock: In Stock
Model: PSU-12v40A500W
A powerful power supply, capable of supplying any 3D printer with complete stability, thanks to its 40-amp is powering the most demanding configurations, double extruder, simultaneous heating of the Heated Bed and the Extruder, etc.Compact size.Thoroughly tested in our printers, you can feed a ..
42.50€ 23.99€
Ex Tax:19.83€
Only a few units in stock
-68 %
Stock: In Stock
Model: psu-12v5a60w
It is a small power supply, which can power a small 3D printer without hot bed, a plotter, a laser cutter, or any other small CNC. It can also be used for LED lighting or general electronics.Compact size.Protections:ShortcircuitOverloadOvervoltageOver temp protectionBuild-in EMI filter with&nbs..
18.95€ 6.00€
Ex Tax:4.96€
Only a few units in stock
-47 %
Stock: In Stock
Model: PSU-24v10A
Protections:ShortcircuitOverloadOvervoltageOver temp protectionBuild-in EMI filter with 100% full load burn-in test..
28.00€ 14.95€
Ex Tax:12.36€
-53 %
Stock: In Stock
Model: PSU-24v15A
A powerful power supply, capable of supplying any 24v 3D printer with complete stability, thanks to its 360w is powering the most demanding configurations, double extruder, simultaneous heating of the Heated Bed and the Extruder, etc.Compact size.Protections:ShortcircuitOverloadOvervoltage..
38.50€ 17.95€
Ex Tax:14.83€
Only a few units in stock
-38 %
Stock: In Stock
Model: PSU-24v20A500W
A powerful power supply, capable of supplying any 24v 3D printer with complete stability, thanks to its 480w is powering the most demanding configurations, double extruder, simultaneous heating of the Heated Bed and the Extruder, etc.Compact size.Protections:ShortcircuitOverloadOvervoltage..
38.50€ 23.99€
Ex Tax:19.83€
-20 %
Stock: In Stock
Model: Protector-fuente-3Dsteel
Printed protective part for the 33A power supply used by the 3DSteel printer.You can make the connections of the power supply and then place the printed pieces. Thanks to its design it is very easy to assemble and manipulate afterwards.It is designed to use the power outlet with switch, so that it w..
7.50€ 6.00€
Ex Tax:4.96€