Hot Sales
-79 %
Stock: In Stock
Model: Nut-T8x8
This copper nut is used for the movement of the Z axis in 3D printers. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions: Diameter: 8mm Thread pitch: 8mm 1 Piece ..
6.00€ 1.25€
Ex Tax:1.03€
New
-79 %
Stock: In Stock
Model: Nut-T8x2
This copper nut is used for the movement of the Z axis in 3D printers. Nominal dimensions: Diameter: 8mm Thread pitch: 2mm 1 Piece ..
6.00€ 1.25€
Ex Tax:1.03€
Hot Sales
-74 %
Stock: In Stock
Model: LeadScrew-T8x8
Lead screw 8mm diameter is used for the movement of the Z axis in 3D printers. You can choose the type of nut. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions: Diameter: 8mm Length: as option Thread pitch: 8mm 1 Piece ..
15.00€ 3.85€
Ex Tax:3.18€
New
-71 %
Stock: In Stock
Model: LeadScrew-T8x2
Lead screw 8mm diameter is used for the movement of the Z axis in 3D printers. Nominal dimensions: Diameter: 8mm Length: as option Thread pitch: 2mm 1 Piece ..
15.00€ 4.35€
Ex Tax:3.60€
Only a few units in stock
-23 %
Stock: In Stock
Model: Grasa-10g
Lubricating grease for maintenance of your 3D printer.Especially recommended for spindles.Material: GreaseType: LubricationSize: 10g..
1.50€ 1.15€
Ex Tax:0.95€
-44 %
Stock: In Stock
Model: 17HS4401s-T8x8-310MM
Precision motor T8x8
trapezoidal screw integral with the shaft. By eliminating the need
for flexible couplings problems of shaft misalignment are eliminated
and results in a more compact solution. Specifications:
Shaft length: 310mm
Step : 8mm 1/32
Controller re..
44.99€ 25.00€
Ex Tax:20.66€
-42 %
Stock: In Stock
Model: 17HS4401s-T8x8-350MM
Precision motor T8x8
trapezoidal screw integral with the shaft. By eliminating the need
for flexible couplings problems of shaft misalignment are eliminated
and results in a more compact solution. Specifications:
Shaft length: 350mm
Step : 8mm 1/32
Controller re..
46.89€ 26.99€
Ex Tax:22.31€
-79 %
Stock: In Stock
Model: Nut-T8x8
This POM nut is used for the movement of the Z axis in 3D printers. The POM is a material with a low friction that is machined very precisely, which makes the movement with these nuts very precise and without play.Steps per mm: 800 (using 1/32 drivers) Nominal dimensions: Di..
6.00€ 1.25€
Ex Tax:1.03€
New
Only a few units in stock
-53 %
Stock: In Stock
Model: Spring-Nut-T8x8-Copper
This copper nut is used for the movement of the Z axis in 3D printers. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions: Diameter: 8mm Thread pitch: 8mm 1 Piece ..
4.00€ 1.89€
Ex Tax:1.56€
New
-53 %
Stock: In Stock
Model: Spring-Nut-T8x2-Copper
This copper nut is used for the movement of the Z axis in 3D printers. Nominal dimensions: Diameter: 8mm Thread pitch: 2mm 1 Piece ..
4.00€ 1.89€
Ex Tax:1.56€
Hot Sales
-6 %
Stock: In Stock
Model: Rod-D10
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. To order: Select the range of measurement desired ..
2.40€ 2.25€
Ex Tax:1.86€
Stock: In Stock
Model: Rod-D12
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. To order: Select the range of measurement desired ..
3.45€
Ex Tax:2.85€