-23 %
Stock: In Stock
Model: HTA3D-DUAL-EXTRUDER
Based on: https://www.thingiverse.com/thing:2228901
Extruder kit content (configurable):
Hotend Chimera style. Equipped with fan 3010,2x 40w heating cartridges, 2x NTC 100kΩ thermistors, Teflon tube and 4 BSP connectors PC04-1
2x Motors Nema 17 - length 40mm - with 1..
95.00€ 73.50€
Ex Tax:60.74€
Recommended
-39 %
Stock: In Stock
Model: 3DSteel
Main Features:Pre-assembled kit without weldsFast and very easy assembly, which does not require knowledge of electronics or mechanics.We have simplified the assembly by sending preassembled parts:Extruder fully assembled with connections prepared.Welded heated bed, with prepared connections and the..
650.00€ 399.00€
Ex Tax:329.75€
-48 %
Stock: In Stock
Model: P3STEEL-DUAL
DUAL P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the
P3STEEL redesigned by HTA3D.Due to its performance this is the model we use for our printings.Features:Printing volume: 200x200x200 (XYZ).Maximum printing speed recommended: 160x160x3 mm/s.Compatible with a..
530.00€ 275.00€
Ex Tax:227.27€
-46 %
Stock: In Stock
Model: P3STEEL
P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the
P3STEEL redesigned by HTA3D.Due to its performance this is the model we use for our printings.Features:Printing volume: 200x200x210 (XYZ).Maximum printing speed recommended: 160x160x3 mm/s.Compatible with all 1...
475.00€ 255.00€
Ex Tax:210.74€
Only a few units in stock
-37 %
Stock: In Stock
Model: Prusa-i3-Rework
Prusa i3 Rework – DIY Kit
This kit includes all the needed components for the construction
of Prusa I3 Rework.
Based on:
http://reprap.org/wiki/Prusa_i3_Rework_Introduction
Composition:
Acrylic Frame
(10mm)
Rods Kit
Printed Parts
Electronics
Movement..
350.00€ 220.00€
Ex Tax:181.82€
Hot Sales
-6 %
Stock: In Stock
Model: Rod-D10
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. To order: Select the range of measurement desired ..
2.40€ 2.25€
Ex Tax:1.86€
Stock: In Stock
Model: Rod-D12
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. To order: Select the range of measurement desired ..
3.45€
Ex Tax:2.85€
Hot Sales
Stock: In Stock
Model: Rod-D8
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm / m.To or..
1.21€
Ex Tax:1.00€
Stock: In Stock
Model: Rod-M10
Material: Zinc-plated steel Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. To order: Select the range of measurement desired Enter in mm the mea..
1.50€
Ex Tax:1.24€
Stock: In Stock
Model: Rod-M8
Material: Zinc-plated steel Precision cutting: cutting is done by hand, so mesure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. To order: Select the range of measurement desired Enter in mm the measurem..
1.39€
Ex Tax:1.15€
-68 %
Stock: In Stock
Model: M8x60 DIN 913 ISO 4014 8.8
Hobbed Bolt for 3D printer, based on Reprap community design: http://reprap.org/wiki/Wade's_Geared_Extruder#The_Hobbed_Bolt
M8 x 60mm knurled at a standard meassure, 25mm from
the head of the bolt aproximately. This features are adapted to the
last versions of Greg's Wade extruder, ..
8.99€ 2.85€
Ex Tax:2.36€
Stock: In Stock
Model: Piezas impresas 3DSteel
Contains all the necessary parts to mount our 3DSteel, they are compatible with our steel frame.Content:Extruder (1,75mm):X axis:Y axis:Z axis:Box for Ramps 1.4LCD CaseCover for power supply..
29.99€
Ex Tax:24.79€