Only a few units in stock
-10 %
Stock: In Stock
Model: Hotend 2 in 1 mix
This hotend is a simple solution to print parts in two colors or different materials without the characteristic problems of the dual nozzles, such as stains and lags in printing. All material is extruded by the same nozzle, so there are no lags and calibration is simpler and more stable.This version..
44.50€ 39.99€
Ex Tax:33.05€
New
-57 %
Stock: In Stock
Model: Brass-V6-Heater-Block-PT100
This material is more resistant and has a higher thermal inertia, so we can tighten the nozzle more without passing the thread, and having a higher thermal inertia the temperature will remain much more stable during printing.The v6 Heater Block has been upgraded to clamp both the
heater cartridge a..
14.00€ 5.99€
Ex Tax:4.95€
-21 %
Stock: In Stock
Model: Cable-12AWG-70cm-01
Red and black wires to power the RAMPS from the power supply.It is a tinned copper cable resistant to high temperatures. With silicone protection, it is very flexible.One of the ends is welded to facilitate the introduction of the cable into the RAMPS connector.Length: 70cmSection: 3.31mm²Diameter: ..
3.50€ 2.75€
Ex Tax:2.27€
-25 %
5 - 10 Days
Stock: 5 - 10 Days
Model: Cable-16AWG-50cm-01
Red and black wires for the heated bed. Red and black cables for the heated bed. One end of each cable has a connector crimped for the connection to the Ramps.It is a tinned copper cable resistant to high temperatures. With silicone protection, it is very flexible.One of the ends is welded to facili..
3.00€ 2.25€
Ex Tax:1.86€
Hot Sales
-47 %
Out of Stock
Stock: Out of Stock
Model: Spiral-1m
It is used to maintain the orderly wiring, avoid tangles and pulls1meter..
1.49€ 0.79€
Ex Tax:0.65€
Hot Sales
Out of Stock
Stock: Out of Stock
Model: Terminal-4
It is commonly used to make connections to the power supply safely...
0.12€
Ex Tax:0.10€
-48 %
Out of Stock
Stock: Out of Stock
Model: cnc-shield-v3
Shield for Arduino UNO and other compatible boards, it is used to control CNC machines as plotters, laser engravers, milling machines, etc. 1 Piece with jumpers..
4.95€ 2.59€
Ex Tax:2.14€
Only a few units in stock
-54 %
Stock: In Stock
Model: psu-12v10a120w
It is a small power supply, which can power a small 3D printer without hot bed, a plotter, a laser cutter, or any other CNC. It can also be used for LED lighting or general electronics.Compact size.Protections:ShortcircuitOverloadOvervoltageOvertemp protectionBuild-in EMI filter with 100% ..
20.00€ 9.20€
Ex Tax:7.60€
-56 %
Out of Stock
Stock: Out of Stock
Model: psu-12v15a180w
It is a small power supply, which can power a small 3D printer without hot bed, a plotter, a laser cutter, or any other CNC. It can also be used for LED lighting or general electronics.Compact size.Protections:ShortcircuitOverloadOvervoltageOvertemp protectionBuild-in EMI filter with 100% ..
28.00€ 12.45€
Ex Tax:10.29€
-50 %
Out of Stock
Stock: Out of Stock
Model: psu-12v20a250w
It is a small power supply, can power a small 3d printer with hot bed, a plotter, laser cutter, or any other CNC, can also be used for LED lighting or general electronics.Compact size.Protections:ShortcircuitOverloadOvervoltageOver temp protectionBuild-in EMI filter with 100% full load&nbs..
33.00€ 16.50€
Ex Tax:13.64€
Only a few units in stock
-52 %
Stock: In Stock
Model: PSU-12v33A
A powerful power supply, capable of supplying any 3D printer with complete stability, thanks to its 33-amp is powering the most demanding configurations, double extruder, simultaneous heating of the Heated Bed and the Extruder, etc.Compact size.Thoroughly tested in our printers, you can feed a ..
38.50€ 18.45€
Ex Tax:15.25€
Only a few units in stock
-44 %
Stock: In Stock
Model: PSU-12v40A500W
A powerful power supply, capable of supplying any 3D printer with complete stability, thanks to its 40-amp is powering the most demanding configurations, double extruder, simultaneous heating of the Heated Bed and the Extruder, etc.Compact size.Thoroughly tested in our printers, you can feed a ..
42.50€ 23.99€
Ex Tax:19.83€