Menu
Your Cart
THIS IS A TEST SITE, IF YOU ARE HERE BY MISTAKE PLEASE GO TO OUR REAL SITE: WWW.HTA3D.COM

Cable 16AWG to connect the heated bed to the electronics

Cable 16AWG to connect the heated bed to the electronics
-25 % 5 - 10 Days

Red and black wires for the heated bed. Red and black cables for the heated bed. One end of each cable has a connector crimped for the connection to the Ramps.

It is a tinned copper cable resistant to high temperatures. With silicone protection, it is very flexible.

One of the ends is welded to facilitate the introduction of the cable into the RAMPS connector.


  • Length: 50cm
  • Cable diameter: 1.53mm
  • Outer diameter: 3mm


2 units, one red and one black

Write a review

Note: HTML is not translated!
Bad Good
Tags: power, supply, electronic
Quickview
Bipolar expansion cable for fans
-16 %
Bipolar expansion cable for fans
Bipolar extension cable for fans.One of the ends is crimped for the connection in the power supply or electronics and the other has welded a connector..
1.90€ 1.60€ Ex Tax:1.32€
Add to Cart
Add to Wish List Compare this Product
Quickview
Bipolar wire - 1mm2 section - 1 meter length
Bipolar wire - 1mm2 section - 1 meter length
The price is for 1 meter, if you want consecutive meters we can offer up to 10 meters...
0.59€ Ex Tax:0.49€
Add to Cart
Add to Wish List Compare this Product
Quickview
Cable 12AWG to connect the power supply y RAMPS
-21 %
Cable 12AWG to connect the power supply y RAMPS
Red and black wires to power the RAMPS from the power supply.It is a tinned copper cable resistant to high temperatures. With silicone protection, it ..
3.50€ 2.75€ Ex Tax:2.27€
Add to Cart
Add to Wish List Compare this Product
Quickview
Cable Case in Spiral - 8mm - 1m
Hot Sales -47 % Out of Stock
Cable Case in Spiral - 8mm - 1m
It is used to maintain the orderly wiring, avoid tangles and pulls1meter..
1.49€ 0.79€ Ex Tax:0.65€
Add to Cart
Add to Wish List Compare this Product
Quickview
Cable Terminal - Hole for M4 - Type Eyelet Cable Terminal - Hole for M4 - Type Eyelet
Hot Sales Out of Stock
Cable Terminal - Hole for M4 - Type Eyelet
It is commonly used to make connections to the power supply safely...
0.12€ Ex Tax:0.10€
Add to Cart
Add to Wish List Compare this Product
Quickview
Heater Cartridge - Heater 24V 50W Heater Cartridge - Heater 24V 50W
-48 % Out of Stock
Heater Cartridge - Heater 24V 50W
Voltage: 24V Power: 50WHeating head size: 6x20mmHeating head material: 304 stainless steelLine length: 1mLine thick: 0.5 mm² (the cross section o..
4.24€ 2.20€ Ex Tax:1.82€
Add to Cart
Add to Wish List Compare this Product
Quickview
Thermistor 100K ohm NTC 3950 wired Thermistor 100K ohm NTC 3950 wired
Hot Sales Only a few units in stock -78 %
Thermistor 100K ohm NTC 3950 wired
Thermistor ideal for the Heated Bed or Hotend. 100K ohm NTC 3950 1m wire with dupont connector1 Piece..
3.20€ 0.69€ Ex Tax:0.57€
Add to Cart
Add to Wish List Compare this Product
Quickview
Thermal Insulation for Heated Bed
Hot Sales -22 %
Thermal Insulation for Heated Bed
Thermal Insulation for Heated Bed It is composed of 3 layers:Aluminium that acts as a thermal refractory.Air chamber to avoid thermal conduction...
2.50€ 1.95€ Ex Tax:1.61€
Add to Cart
Add to Wish List Compare this Product
Quickview
ALU Heatbed MK3 220x220 12v / 24v - With countersunk holes for screw head ALU Heatbed MK3 220x220 12v / 24v - With countersunk holes for screw head
-67 %
ALU Heatbed MK3 220x220 12v / 24v - With countersunk holes for screw head
All features similar to MK2 12v / 24v Volt.Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but no..
35.00€ 11.50€ Ex Tax:9.50€
Add to Cart
Add to Wish List Compare this Product
Quickview
Nylon protective cover for wires - 1m Nylon protective cover for wires - 1m
-46 % 5 - 10 Days
Nylon protective cover for wires - 1m
Braided mesh tube made of PET friendly to the environment.Features:Soft finish, easy to bend, elastic and easy to wire.It has good flexibility, resist..
1.65€ 0.89€ Ex Tax:0.74€
Add to Cart
Add to Wish List Compare this Product
Quickview
Cristal para cama caliente con recubrimiento microposoro tipo Ultrabase - 220x220x4mm Cristal para cama caliente con recubrimiento microposoro tipo Ultrabase - 220x220x4mm
Only a few units in stock -33 %
Cristal para cama caliente con recubrimiento microposoro tipo Ultrabase - 220x220x4mm
This printing base is a glass with microporous coating that increases adherence. Also, you do not need clamps for placement.Features:Great a..
30.00€ 19.99€ Ex Tax:16.52€
Add to Cart
Add to Wish List Compare this Product
Quickview
Manual adjustment M3 nut for heated bed leveling Manual adjustment M3 nut for heated bed leveling
Hot Sales --22 %
Manual adjustment M3 nut for heated bed leveling
This nut is used to facilitate manual leveling of the hot bed, since only the nut needs to be turned to tighten or loosen the screw.Specifications:Lar..
0.09€ 0.11€ Ex Tax:0.09€
Add to Cart
Add to Wish List Compare this Product
Quickview
Nuts and bolts kit for heated bed assembly for surface with countersunk holes
-25 %
Nuts and bolts kit for heated bed assembly for surface with countersunk holes
This kit contains:4 M3x25 countersunk bolts4 self-locking M3 nuts4 M3 washers DIN 90214 springs 1cm..
2.00€ 1.50€ Ex Tax:1.24€
Add to Cart
Add to Wish List Compare this Product
Quickview
Compact Power Supply - DC 12V 33A - 400W Compact Power Supply - DC 12V 33A - 400W
Only a few units in stock -52 %
Compact Power Supply - DC 12V 33A - 400W
A powerful power supply, capable of supplying any 3D printer with complete stability, thanks to its 33-amp is powering the most demanding configu..
38.50€ 18.45€ Ex Tax:15.25€
Add to Cart
Add to Wish List Compare this Product
Quickview
Compact Power Supply - DC 12V 15A 180W Compact Power Supply - DC 12V 15A 180W
-56 % Out of Stock
Compact Power Supply - DC 12V 15A 180W
It is a small power supply, which can power a small 3D printer without hot bed, a plotter, a laser cutter, or any other CNC. It can also be used for L..
28.00€ 12.45€ Ex Tax:10.29€
Add to Cart
Add to Wish List Compare this Product
Quickview
Compact Power Supply - DC 12V 20A 250W Compact Power Supply - DC 12V 20A 250W
-50 % Out of Stock
Compact Power Supply - DC 12V 20A 250W
It is a small power supply, can power a small 3d printer with hot bed, a plotter, laser cutter, or any other CNC, can also be used for LED lighting or..
33.00€ 16.50€ Ex Tax:13.64€
Add to Cart
Add to Wish List Compare this Product
Quickview
Compact Power Supply - DC 12V 10A 120W Compact Power Supply - DC 12V 10A 120W
Only a few units in stock -54 %
Compact Power Supply - DC 12V 10A 120W
It is a small power supply, which can power a small 3D printer without hot bed, a plotter, a laser cutter, or any other CNC. It can also be used for L..
20.00€ 9.20€ Ex Tax:7.60€
Add to Cart
Add to Wish List Compare this Product
Quickview
Printed part power supply for 3DSteel Printed part power supply for 3DSteel
-20 %
Printed part power supply for 3DSteel
Printed protective part for the 33A power supply used by the 3DSteel printer.You can make the connections of the power supply and then place the print..
7.50€ 6.00€ Ex Tax:4.96€
Add to Cart
Add to Wish List Compare this Product
Quickview
Printed part for 3DSteel electronics Printed part for 3DSteel electronics
-20 %
Printed part for 3DSteel electronics
Printed part for the electronics that the 3DSteel printer carries. Protects and assembles in the structure in an easy and safe way.All the electronic ..
7.50€ 6.00€ Ex Tax:4.96€
Add to Cart
Add to Wish List Compare this Product