-50 %
Stock: In Stock
Model: Airtripper Bowden BSP
Composition:
-Printed parts (ABS)
-MK8
Drive Gear
-Bearings:
1 x 608zz
1 x MR105ZZ
-Hardware:
4 x M3 Washers
4 x M3 Nuts
1 x M3 25mm
2 x M3 30mm
1 x M3 6mm
..
16.93€ 8.50€
Ex Tax:7.02€
-68 %
Stock: In Stock
Model: Hotend-V6-1.75mm
Advantages:
It can print any material: From PLA, due to it thermical
barrier made of stainless steel and its dissipation with
forced ventilation, to Nylon, Polycarbonate, Polyoxymethylene y
others thermoplastics which need higher temperatures. And also, as
it is natural..
59.95€ 18.95€
Ex Tax:15.66€
-69 %
Stock: In Stock
Model: Hotend-V6-1.75-PT100Termistor
The main advantage of this Hotend with respect to the conventional V6 is the change of the heating block and thermistor.It is an encapsulated thermistor, which makes it more resistant to deterioration and breakage.Also, as an insulator, use a silicone sock specially adapted for the heating block. Th..
69.99€ 21.50€
Ex Tax:17.77€
Only a few units in stock
-58 %
Stock: In Stock
Model: Mk3
All features similar to MK2, you can also operate this board with 12 Volt or 24 Volt Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend..
25.99€ 10.90€
Ex Tax:9.01€
-67 %
Stock: In Stock
Model: Mk3-220x220-12/24v
All features similar to MK2 12v / 24v Volt.Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend insulating the bottom side with Thermal Insula..
35.00€ 11.50€
Ex Tax:9.50€
Only a few units in stock
-52 %
Stock: In Stock
Model: Mk3-220x280
Hotbed size 220x280 With countersunk holes for screw head, compatible with most Y-axis carriages, including 220x220 or 214x214 bed carriages, because of it has exactly the same spacing between holes (209mm).All features similar to MK2 12 VoltHeatbed with 3mm aluminum core. You can print directly on ..
45.00€ 21.50€
Ex Tax:17.77€
-53 %
Stock: In Stock
Model: Mk3-300x200
All features similar to MK2 12 VoltHeatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend insulating the bottom side with Thermal InsulatorDual power..
49.99€ 23.50€
Ex Tax:19.42€
Only a few units in stock
-19 %
Stock: In Stock
Model: Mk3-300x300-24v
Caution! This bed has a very high power, it can damage the electronics or the power supply if it is not dimensioned correctly.We advise to regulate the power by firmware adjusting this line:#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current 127= 50%So it doesn't overlo..
55.00€ 44.50€
Ex Tax:36.78€
-33 %
Stock: In Stock
Model: SHF10
Support for 10mm rods or shafts, used for both 3D printers and CNC machines.Material: Aluminium1 Piece..
3.50€ 2.35€
Ex Tax:1.94€
-38 %
Stock: In Stock
Model: SHF12
Support for 12mm rods or shafts, used for both 3D printers and CNC machines.Material: Aluminium1 Piece..
4.00€ 2.50€
Ex Tax:2.07€
-34 %
Stock: In Stock
Model: SHF8
Support for 8mm rods or shafts, used for both 3D printers and CNC machines.Material: Aluminium1 Piece..
3.50€ 2.32€
Ex Tax:1.92€
-68 %
Stock: In Stock
Model: SK10
Support for 10mm rods or shafts, used for both 3D printers and CNC machines.Material: Aluminium1 Piece..
3.10€ 0.99€
Ex Tax:0.82€