Only a few units in stock
-68 %
Stock: In Stock
Model: psu-12v5a60w
It is a small power supply, which can power a small 3D printer without hot bed, a plotter, a laser cutter, or any other small CNC. It can also be used for LED lighting or general electronics.Compact size.Protections:ShortcircuitOverloadOvervoltageOver temp protectionBuild-in EMI filter with&nbs..
18.95€ 6.00€
Ex Tax:4.96€
Only a few units in stock
-47 %
Stock: In Stock
Model: PSU-24v10A
Protections:ShortcircuitOverloadOvervoltageOver temp protectionBuild-in EMI filter with 100% full load burn-in test..
28.00€ 14.95€
Ex Tax:12.36€
-53 %
Stock: In Stock
Model: PSU-24v15A
A powerful power supply, capable of supplying any 24v 3D printer with complete stability, thanks to its 360w is powering the most demanding configurations, double extruder, simultaneous heating of the Heated Bed and the Extruder, etc.Compact size.Protections:ShortcircuitOverloadOvervoltage..
38.50€ 17.95€
Ex Tax:14.83€
Only a few units in stock
-38 %
Stock: In Stock
Model: PSU-24v20A500W
A powerful power supply, capable of supplying any 24v 3D printer with complete stability, thanks to its 480w is powering the most demanding configurations, double extruder, simultaneous heating of the Heated Bed and the Extruder, etc.Compact size.Protections:ShortcircuitOverloadOvervoltage..
38.50€ 23.99€
Ex Tax:19.83€
Stock: In Stock
Model: Muelle-01
The springs are used in 3D printers for different reasons, the main one is for elements that require a certain pressure, such as the extruder tensioner. In this way, the tension adapts to the differences of the filament diameter.Also used for items that require adjustment, such as the heatedbed.Inne..
0.17€
Ex Tax:0.14€
-30 %
Stock: In Stock
Model: conector esquina 3 conexiones - 3030
Connector for European standard industrial aluminum profiles.Connect three profiles together and fasten them with screws, in a simple and discreet way.4x M6 setscrews included.Material: zinc alloyDimensions:..
2.99€ 2.10€
Ex Tax:1.74€
Hot Sales
-79 %
Stock: In Stock
Model: Nut-T8x8
This copper nut is used for the movement of the Z axis in 3D printers. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions: Diameter: 8mm Thread pitch: 8mm 1 Piece ..
6.00€ 1.25€
Ex Tax:1.03€
New
-79 %
Stock: In Stock
Model: Nut-T8x2
This copper nut is used for the movement of the Z axis in 3D printers. Nominal dimensions: Diameter: 8mm Thread pitch: 2mm 1 Piece ..
6.00€ 1.25€
Ex Tax:1.03€
Only a few units in stock
-33 %
Stock: In Stock
Model: Cristal-recubrimiento-220x220
This printing base is a glass with microporous coating that increases adherence. Also, you do not need clamps for placement.Features:Great adhesion: it is covered by microporous coating, which has an adhesion during printing. Once it cools, it's easy to take off.Superplanitud of surface, f..
30.00€ 19.99€
Ex Tax:16.52€
-20 %
Stock: In Stock
Model: Cristal-recubrimiento-310x310
This printing base is a glass with microporous coating that increases adherence. Also, you do not need clamps for placement.Features:Great adhesion: it is covered by microporous coating, which has an adhesion during printing. Once it cools, it's easy to take off.Superplanitud of surface, f..
45.00€ 35.80€
Ex Tax:29.59€
Hot Sales
-74 %
Stock: In Stock
Model: DRV8825
The DRV8828 is a driver for stepper motors, with a resolution of 1/32 steps. Datasheet: https://www.pololu.com/product/2133 Heatsink included with thermal tape1 Piece ..
8.99€ 2.33€
Ex Tax:1.93€
-69 %
Stock: In Stock
Model: Dual-4.1-Throat
Compatible with 1.75mm filament
Material: Stainless Steel
This model allows the teflon tube reach the nozzle
This configuration allows printing with PLA and flexible filaments
is much easier
..
12.99€ 3.99€
Ex Tax:3.30€