Prusa I3 Steel - P3Steel by HTA3D printed parts
28.00€
Ex Tax: 23.14€
- Stock: In Stock
- Model: Piezas impresas - P3Steel por HTA3D
THIS IS A TEST SITE, IF YOU ARE HERE BY MISTAKE PLEASE GO TO OUR REAL SITE: WWW.HTA3D.COM
Prusa I3 Steel - P3Steel by HTA3D printed parts
-30 %
HTA3D
Single Extruder - optimized for flexible filament - Mk8 and V6
Based
on:
http://www.thingiverse.com/thing:1208307
Improvements:&n..
55.99€ 38.99€
Ex Tax:32.22€
-24 %
This extruder will be sent assembled, if you want to buy the loose components to assemble it yourself you can do it in this link.Main Features:Extreme..
99.00€ 74.99€
Ex Tax:61.98€
-25 %
KIT KOSSEL PLA+ABS PRINTED PARTS
Based on: http://reprap.org/wiki/Kossel
This kit is printed pieces following ..
39.99€ 29.99€
Ex Tax:24.79€
-10 %
L3k Improved new Greg's Wade Extruder Based on: https://github.com/lautr3k/Wade-L3K http://www.thingiverse.com/thing:512338 ..
15.00€ 13.49€
Ex Tax:11.15€
-20 %
Printed part for the electronics that the 3DSteel printer carries. Protects and assembles in the structure in an easy and safe way.All the electronic ..
7.50€ 6.00€
Ex Tax:4.96€
-20 %
Printed protective part for the 33A power supply used by the 3DSteel printer.You can make the connections of the power supply and then place the print..
7.50€ 6.00€
Ex Tax:4.96€
-23 %
Based on: https://www.thingiverse.com/thing:2228901
Extruder kit content (configurable):
Hotend Chimera style. Equipped with f..
95.00€ 73.50€
Ex Tax:60.74€
Recommended
-39 %
Main Features:Pre-assembled kit without weldsFast and very easy assembly, which does not require knowledge of electronics or mechanics.We have simplif..
650.00€ 399.00€
Ex Tax:329.75€
-48 %
DUAL P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the
P3STEEL redesigned by HTA3D.Due to its performance this ..
530.00€ 275.00€
Ex Tax:227.27€
-46 %
P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the
P3STEEL redesigned by HTA3D.Due to its performance this is th..
475.00€ 255.00€
Ex Tax:210.74€
Only a few units in stock
-37 %
Prusa i3 Rework – DIY Kit
This kit includes all the needed components for the construction
of Prusa I3 Rework.
Based on:
http://repra..
350.00€ 220.00€
Ex Tax:181.82€
Only a few units in stock
-52 %
A powerful power supply, capable of supplying any 3D printer with complete stability, thanks to its 33-amp is powering the most demanding configu..
38.50€ 18.45€
Ex Tax:15.25€
Hot Sales
-62 %
Coupler Shaft from 5mm to 8mm, commonly used for Z axis. Material: Aluminium Input: 5mm Output: 8mm Lenght: 25 mm Diame..
2.99€ 1.15€
Ex Tax:0.95€
Hot Sales
Only a few units in stock
-65 %
The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to the..
12.99€ 4.50€
Ex Tax:3.72€
Hot Sales
-74 %
The DRV8828 is a driver for stepper motors, with a resolution of 1/32 steps. Datasheet: https://www.pololu.com/product/2133 Heatsink in..
8.99€ 2.33€
Ex Tax:1.93€
The springs are used in 3D printers for different reasons, the main one is for elements that require a certain pressure, such as the extruder tensione..
0.17€
Ex Tax:0.14€
Hot Sales
-59 %
Bearings LM8UU stardard, which are used in reprap printers for the linear movement using smoth ribs of 8mm. Depending on the number of bearings ..
1.20€ 0.49€
Ex Tax:0.41€
-73 %
P3Steel by HTA3D Nuts and Bolts:Screws:M3x8 - 14 unitsM3x12 - 64 unitsM3x16 - 7 unitsM3x20 - 4 unitsM3x25 - 8 un..
20.00€ 5.35€
Ex Tax:4.42€
-68 %
Advantages:
It can print any material: From PLA, due to it thermical
barrier made of stainless steel and its dissipation with
..
59.95€ 18.95€
Ex Tax:15.66€
-46 %
P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the
P3STEEL redesigned by HTA3D.Due to its performance this is th..
475.00€ 255.00€
Ex Tax:210.74€
-30 %
HTA3D
Single Extruder - optimized for flexible filament - Mk8 and V6
Based
on:
http://www.thingiverse.com/thing:1208307
Improvements:&n..
55.99€ 38.99€
Ex Tax:32.22€
-16 %
1.
GALVANIZED STEEL FRAME (3MM):
Laser
cutting of a high-quality galvanized steel sheet, according to our
redesign, with the following improvement..
70.00€ 59.00€
Ex Tax:48.76€
-48 %
DUAL P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the
P3STEEL redesigned by HTA3D.Due to its performance this ..
530.00€ 275.00€
Ex Tax:227.27€
Contains all the necessary parts to mount our Dual P3Steel kit by HTA3D, they are compatible with our steel frame.Content:Extruder (1,75mm):2x Body2x ..
24.00€
Ex Tax:19.83€
Check out this bundle
The main mechanical elements of our kit P3Steel by HTA3D, don't forget to include the flexible couplers 5x5 or 5x8 depending on the Z-axis rods you us..
MK8 for 1,75mm filament
0.89€
623zz Bearing
0.29€
Related Posts
17 Jan
0
3061
We have created new step-by-step tutorials for the assembly of our P3steel, which makes it easier to keep the printer's assembly instructions updated.
The format of the tutorial is very visual and detailed, and are explained with precision the assembly of each component.
With this tutorial we intend to update the documentation and suppo..