3DSteel - P3Steel / Prusa I3 Steel Evolution Printed Parts
29.99€
Ex Tax: 24.79€
- Stock: In Stock
- Model: Piezas impresas 3DSteel
THIS IS A TEST SITE, IF YOU ARE HERE BY MISTAKE PLEASE GO TO OUR REAL SITE: WWW.HTA3D.COM
3DSteel - P3Steel / Prusa I3 Steel Evolution Printed Parts
-30 %
HTA3D
Single Extruder - optimized for flexible filament - Mk8 and V6
Based
on:
http://www.thingiverse.com/thing:1208307
Improvements:&n..
55.99€ 38.99€
Ex Tax:32.22€
-24 %
This extruder will be sent assembled, if you want to buy the loose components to assemble it yourself you can do it in this link.Main Features:Extreme..
99.00€ 74.99€
Ex Tax:61.98€
-25 %
KIT KOSSEL PLA+ABS PRINTED PARTS
Based on: http://reprap.org/wiki/Kossel
This kit is printed pieces following ..
39.99€ 29.99€
Ex Tax:24.79€
-10 %
L3k Improved new Greg's Wade Extruder Based on: https://github.com/lautr3k/Wade-L3K http://www.thingiverse.com/thing:512338 ..
15.00€ 13.49€
Ex Tax:11.15€
-20 %
Printed part for the electronics that the 3DSteel printer carries. Protects and assembles in the structure in an easy and safe way.All the electronic ..
7.50€ 6.00€
Ex Tax:4.96€
-20 %
Printed protective part for the 33A power supply used by the 3DSteel printer.You can make the connections of the power supply and then place the print..
7.50€ 6.00€
Ex Tax:4.96€
-23 %
Based on: https://www.thingiverse.com/thing:2228901
Extruder kit content (configurable):
Hotend Chimera style. Equipped with f..
95.00€ 73.50€
Ex Tax:60.74€
Recommended
-39 %
Main Features:Pre-assembled kit without weldsFast and very easy assembly, which does not require knowledge of electronics or mechanics.We have simplif..
650.00€ 399.00€
Ex Tax:329.75€
-48 %
DUAL P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the
P3STEEL redesigned by HTA3D.Due to its performance this ..
530.00€ 275.00€
Ex Tax:227.27€
-46 %
P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the
P3STEEL redesigned by HTA3D.Due to its performance this is th..
475.00€ 255.00€
Ex Tax:210.74€
Only a few units in stock
-37 %
Prusa i3 Rework – DIY Kit
This kit includes all the needed components for the construction
of Prusa I3 Rework.
Based on:
http://repra..
350.00€ 220.00€
Ex Tax:181.82€
Hot Sales
Only a few units in stock
-78 %
Thermistor ideal for the Heated Bed or Hotend. 100K ohm NTC 3950 1m wire with dupont connector1 Piece..
3.20€ 0.69€
Ex Tax:0.57€
Hot Sales
-92 %
It is used to connect hotends and extruders to teflon tube. On one side it has a thread of 1/8" and on the other a teflon tube connector of 4mm d..
4.99€ 0.39€
Ex Tax:0.32€
Hot Sales
-14 %
CHARACTERISTICS: Filament based on PLA Ingeo 3D850. Its main features are its ease of printing and ceramic finish. It is suitable for ..
9.00€ 7.75€
Ex Tax:6.41€
-73 %
Out of Stock
Thermistor ideal for the Hotend. 100K ohm NTC 3950 1m wire with dupont connectorDurable 304 stainless steel capsuleDiameter 3mmDoes not need..
5.00€ 1.35€
Ex Tax:1.12€
Hot Sales
-65 %
Out of Stock
This teflon tube stands out from others due to lower friction and tighter and more precise tolerances.Features: It is made of polytetrafluoroethy..
0.40€ 0.14€
Ex Tax:0.12€
-36 %
Discontinued
3D printer board compatible with 12 and 24v, uses the powerful ARM cortex-M3 CPU 32-bit processor, and is compatible with Marlin 2.0 onwards.Compatibl..
39.00€ 24.99€
Ex Tax:20.65€
-18 %
Out of Stock
Very versatile graphic display, as it can be connected in two ways at the same time:It can be connected as an external screen, using the pins TX and R..
50.00€ 40.99€
Ex Tax:33.88€
-16 %
1.
GALVANIZED STEEL FRAME (3MM):
Laser
cutting of a high-quality galvanized steel sheet, according to our
redesign, with the following improvement..
70.00€ 59.00€
Ex Tax:48.76€
Recommended
-39 %
Main Features:Pre-assembled kit without weldsFast and very easy assembly, which does not require knowledge of electronics or mechanics.We have simplif..
650.00€ 399.00€
Ex Tax:329.75€
-24 %
This extruder will be sent assembled, if you want to buy the loose components to assemble it yourself you can do it in this link.Main Features:Extreme..
99.00€ 74.99€
Ex Tax:61.98€
-20 %
Printed protective part for the 33A power supply used by the 3DSteel printer.You can make the connections of the power supply and then place the print..
7.50€ 6.00€
Ex Tax:4.96€
-20 %
Printed part for the electronics that the 3DSteel printer carries. Protects and assembles in the structure in an easy and safe way.All the electronic ..
7.50€ 6.00€
Ex Tax:4.96€