Hot Sales
-49 %
Out of Stock
Nema 17 Stepper Motor - 17hs4401 - 5mm D Shaft
15.75€
7.99€
Ex Tax: 6.60€
- Stock: Out of Stock
- Model: 17hs4401
Features:
- 17HS4401: Compact and powerful, ideal for 3D printers in medium size, and also for small CNC machines and robotics in general. This one is the most used size.
- Each motor includes 1 meter of wire with dupont connector at its end.
- The shaft motor is D type, which eases the use of pulleys or couplers.
Nominal electrical specifications:
| Model | Step Angle (deg) | Motor Length (mm) | Rated Current (A) | Phase resistence (ohm) | Phase inductance (mH) | Holding Torque (N·cm min) | Detent Torque (N·cm max) | Rotor Inercia (g·cm2) | Number of wires | Motor weight (g |
|---|---|---|---|---|---|---|---|---|---|---|
| 17HS4401 | 1.8 | 40 | 1.7 | 1.5 | 2.8 | 40 | 2.2 | 54 | 4 | 280 |
1 Piece with 1m wire
Nema 17:
Model |
Step Angle (deg) |
Motor Length (mm) |
Rated Current (A) |
Phase Resistence (ohm) |
Phase Inductance (mH) |
Holding Torque (N·cm min) |
Detent Torque (N·cm max) |
Rotor Inercia (g·cm2) |
Number of wires |
Motor Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|
|
1.8 |
28 |
0.6 |
8 |
10 |
12 |
1.6 |
34 |
4 |
150 |
|
|
1.8 |
34 |
1.3 |
2.4 |
2.8 |
28 |
1.6 |
34 |
4 |
220 |
|
|
1.8 |
40 |
1.7 |
1.5 |
2.8 |
40 |
2.2 |
54 |
4 |
280 |
|
|
1.8 |
48 |
1.7 |
1.8 |
3.2 |
52 |
2.6 |
68 |
4 |
350 |
|
|
1.8 |
60 |
1.7 |
3 |
6.2 |
72 |
|
80 |
4 |
480 |
Nema 23:
Modelo |
Step Angle (grados) |
Motor Length (mm) |
Rated Current (A) |
Phase Resistence (ohm) |
Phase Inductance (mH) |
Holding Torque (N·cm min) |
Detent Torque (N·cm max) |
Rotor Inercia (g·cm2) |
Number of wires |
Motor Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|
|
1.8 |
56 |
2.8 |
0.9 |
2.5 |
126 |
|
300 |
4 |
700 |
