New
-80 %
Stock: In Stock
Model: Dual-Gears-5mm-ID-endurecida
Double pulleys for bondtech extruders, this filament thrust system has proven to be one of the most powerful and reliable. By exerting force on the filament on both sides it is capable of transferring twice as much force as a single pulley, decreasing the possibility that the filament rests on the p..
60.49€ 11.99€
Ex Tax:9.91€
Hot Sales
-87 %
Stock: In Stock
Model: Teflon-tube-4/2-10cm
It is used for extruder systems based on Bowden.Nominal dimensions:Inside diameter: 2mmOutside diameter: 4mmThe price is per 10cm, if you want it cut to 70cm please select 7 units.We can sell continuous pieces up to 25 meters...
0.70€ 0.09€
Ex Tax:0.07€
Hot Sales
-83 %
Stock: In Stock
Model: Teflon-tube-6/4-10cm
It is used for extruder systems based on Bowden. Nominal dimensions: Inside diameter: 4mm Outside diameter: 6mm The price is per 10cm, if you want it cut to 70cm please select 7 units. We can sell continuous pieces up to 10 meters. ..
0.70€ 0.12€
Ex Tax:0.10€
-73 %
Out of Stock
Stock: Out of Stock
Model: Termistor100K ohm NTC 3950-PT100-3mm
Thermistor ideal for the Hotend. 100K ohm NTC 3950 1m wire with dupont connectorDurable 304 stainless steel capsuleDiameter 3mmDoes not need additional electronics (unlike a thermocouple)Greater precision than the normal thermistor.Maximum temperature 350ºC1 Piece..
5.00€ 1.35€
Ex Tax:1.12€
Hot Sales
Only a few units in stock
-78 %
Stock: In Stock
Model: Termistor100K ohm NTC 3950
Thermistor ideal for the Heated Bed or Hotend. 100K ohm NTC 3950 1m wire with dupont connector1 Piece..
3.20€ 0.69€
Ex Tax:0.57€
New
Only a few units in stock
-37 %
Stock: In Stock
Model: Throat-AM-Bimetal-M6-D7
Throat v6 Bimetal Heatbreak High quality - Thread M6 & 7mm diameter - Compatible with v6 - All metal
High quality bimetal throat V6 compatible.This throat stands out for its high quality and good performance thanks to its precise manufacture with two materials: stainless steel and copper.The Bimetal Heatbreak throat has two materials with different thermal conductivity. It is made up of 3 parts, us..
36.50€ 22.99€
Ex Tax:19.00€
New
Only a few units in stock
-37 %
Stock: In Stock
Model: Throat-AM-Bimetal-M6-M7
High quality bimetal throat V6 compatible.This throat stands out for its high quality and good performance thanks to its precise manufacture with two materials: stainless steel and copper.The Bimetal Heatbreak throat has two materials with different thermal conductivity. It is made up of 3 parts, us..
35.00€ 21.99€
Ex Tax:18.17€
New
-65 %
Stock: In Stock
Model: V6-Titanium-throat
Titanium is a material with excellent mechanical and thermal properties, which allows us to offer a throat with the following advantages:Thanks to its excellent machinability and super-precise production process this throat has very tight tolerances.Its interior finish is mirror effect, which favors..
20.00€ 6.90€
Ex Tax:5.70€
-70 %
Stock: In Stock
Model: V6Dual-Full
V6 Dual Hotend compatible with bowden system Features: Compatible with V6 components, such as nozzles and heater block. It can be configured for two different temperatures on each end, so multiple materials can be printed. Easy leveling system for the nozzle. Light and compa..
96.80€ 28.99€
Ex Tax:23.96€
-69 %
Stock: In Stock
Model: V6Dual-M
V6 Dual Hotend compatible with bowden system Features: Compatible with V6 components, such as nozzles and heater block. It can be configured for two different temperatures on each end, so multiple materials can be printed. Easy leveling system for the nozzle. Light and compa..
84.70€ 26.50€
Ex Tax:21.90€
Hot Sales
-92 %
Stock: In Stock
Model: V6-Heater-Block
The v6 Heater Block has been upgraded to clamp both the
heater cartridge and thermistor in place. These design improvements
improve the thermal response of the HotEnd and make thermistor assembly easier.
This product also comes with the following fixings:
M3x0.5x4
socket dome screw and..
12.00€ 0.99€
Ex Tax:0.82€
-84 %
Stock: In Stock
Model: V6-Heatsink-Remote
This version is more compact than the version v5.
The inner diameter is 4.2 mm, which allows to enter a teflon tube down
the throat, thereby minimizing friction.
Connections:
Bottom M7 - Compatible with throats style v6
Top designed to connect to the connector PC04-1
..
14.99€ 2.35€
Ex Tax:1.94€