Microservo TowerPro SG90 mini 9g with accessories

This small servo is commonly used in 3d printers to move small parts that do not need much force as arms for position sensors.

- Dimensions approx: 22x11.5x27 mm

- Movement speed: 0.12 sec / 60 deg at 4.8 v no load

- Torque: 1.2 kg / cm to 4.8 v

- Operating voltage: from 3v to 7.2v

- Includes 3 arms and screws

Conections:

Drack gray: Ground

Red: Vcc

Orange: Signal