HTA3D Single Extruder - optimized for flexible filament - Mk8 and V6

HTA3D Single Extruder - optimized for flexible filament - Mk8 and V6

Based on: 

http://www.thingiverse.com/thing:1208307

Improvements: 

• Extremely precise movement of the filament through the stainless steel MK8, considered the best at the market 

• Greater extrusion control, the filament glides smoothly across the teflon tube, avoiding precision losses caused by friction 

• Great thermal control thanks to hotend V6 

• You can print higher, because it is very compact in Z 

• Lighter and stable 

​Characteristics: 

• Recommended steps/mm 304 if you use controllers with resolution 1/32. And152 if you use resolution1/16 controllers (with stepper motors of 1.8 °)

• Retración recom 1.7 to 30mm / s (0.057s), you save time and trouble extrusion loss

• Maximum temperature 300ºC (limited by the thermistor)

• Compatible with X Carriages 4 screws (as used in the Prussian i3 rework and Wilson)

Content:

• Kit extruder:

  • V6 Hotend All metal. 3010 equipped with fan, 40w cartridge heater and 100kΩ NTC thermistor

  • Motor Nema 17 - length 40mm

  • Printed Parts

  • Mk8 pulley 1.75mm

  • Bearing 623zz

• Screws:

  • 4x M4x25

  • 1x M3x35 - With spring washers.

  • 4x M3x30

  • 2x M3x25

  • 1x M3x16

  • 3x M3x12

  • 2x M3x8

  • Stud bolt 1x M3x10

• Nuts:

  • 4x M4

  • 1x M3

• Extra:

  • X Carriage

    Add the printed piece to the X carriage without bearings

  • Chains

    Add 22 links to the X-axis energy chain

  • Fan Layer 40x40mm

    Fan added layer 40x40mm with printed piece.

More information: 

• Thingiverse​