-69 %
Stock: In Stock
Model: 3d-print-surface
This is a tough thin plastic film that adheres to the printing base or hot bed.It is designed with a special material in which the printed pieces adhere very tightly, plus its finely rough texture helps. Once the printing is finished, the piece is removed without leaving any residues or marks. No la..
10.00€ 3.15€
Ex Tax:2.60€
Only a few units in stock
-33 %
Stock: In Stock
Model: Cristal-recubrimiento-220x220
This printing base is a glass with microporous coating that increases adherence. Also, you do not need clamps for placement.Features:Great adhesion: it is covered by microporous coating, which has an adhesion during printing. Once it cools, it's easy to take off.Superplanitud of surface, f..
30.00€ 19.99€
Ex Tax:16.52€
-20 %
Stock: In Stock
Model: Cristal-recubrimiento-310x310
This printing base is a glass with microporous coating that increases adherence. Also, you do not need clamps for placement.Features:Great adhesion: it is covered by microporous coating, which has an adhesion during printing. Once it cools, it's easy to take off.Superplanitud of surface, f..
45.00€ 35.80€
Ex Tax:29.59€
Stock: In Stock
Model: Magnet-cut
It can be glued on a hot bed, such as the Mk3, and on this magnet can be placed the different magnetic sheets that exist on the market, such as those coated with PEI powder.They are made of a material that can be easily worked, perforated or cut with scissors and cutter to adapt to the screws of any..
7.99€
Ex Tax:6.60€
New
-22 %
Stock: In Stock
Model: Camacaliente-fysetc-220x200
Features:Rated voltage: 24VIncludes strong neodymium magnets that do not lose properties up to 140ºC4 fixing holes for countersunk screwsPre-welded power cablesThermistor included with connectorFast and uniform heatingIt may present some superficial scratches as it has been manipulated for the welds..
45.00€ 34.99€
Ex Tax:28.92€
-13 %
Out of Stock
Stock: Out of Stock
Model: fleje-templado-0,5mm
Usage:It is possible to print directly on it, but we recommend to use the antiwarping adhesive film for a better performance. Before gluing this film, wipe it with a cloth to remove any stains and make sure that the film sticks correctly.If you only use lacquer on the upper side, the result will be ..
10.00€ 8.75€
Ex Tax:7.23€
-9 %
Discontinued
Stock: Discontinued
Model: MK2A-300x200
MK2b Heated Bed 300x200mm
The hot bed is responsible for heating the bottom of the 3D
printer, so that the pieces remain adhered during printing. Thus the
warping (parts bulge and come off during printing process) is
avoided.
More information:
http://reprap.org/wiki/PCB_Heat..
32.99€ 29.99€
Ex Tax:24.79€
-62 %
Stock: In Stock
Model: MK2B
The hot bed is responsible for heating the bottom of the 3D
printer, so that the pieces remain adhered during printing.Thus the
warping (parts bulge and come off during printing process) is
avoided.
More information:http://reprap.org/wiki/PCB_Heatbed
..
17.99€ 6.80€
Ex Tax:5.62€
-19 %
Out of Stock
Stock: Out of Stock
Model: MK3-avellanada-conexion
Features similar to MK2, for 12 volts:Hot bed with 3 mm aluminum coreThe metal part is the upper print side and the black side is the lower side. It is recommended to insulate the bottom side with thermal insulationFor 12 volt sourceWith countersunk holes for screw head and With ready connectionThe ..
15.99€ 12.99€
Ex Tax:10.74€
Only a few units in stock
-23 %
Stock: In Stock
Model: Mk3-22+cristalmicroporoso
MK3 aluminum and glass with microporous coating.The heated bed is an evolution of the conventional 3mm MK3 hot bed, being more powerful and lightweight, it has been designed to be used with the microposoro coating.It has similar characteristics to MK2, for 12 volts:Heated bed with 1.5 mm aluminum co..
49.00€ 37.90€
Ex Tax:31.32€
New
-57 %
5 - 10 Days
Stock: 5 - 10 Days
Model: Espaciadores-MK52
Spacer set for the Prusa MK3 heated bed.It includes:9 units of 6x6x3 spacers9 M3 bolts1 allen wrench for screws..
7.00€ 2.99€
Ex Tax:2.47€
Only a few units in stock
-33 %
Stock: In Stock
Model: MK52
CharacteristicsRated voltage: 24vIncludes strong neodymium magnets that do not lose properties up to 140ºC9 fixing holes for countersunk screwsPre-welded power cablesThermistor included with connectorNominal power 180w for fast and uniform heatingIt may present some superficial scratches as it has b..
89.00€ 59.95€
Ex Tax:49.55€