Menu
Your Cart
THIS IS A TEST SITE, IF YOU ARE HERE BY MISTAKE PLEASE GO TO OUR REAL SITE: WWW.HTA3D.COM

MK2A Heatbed 300x200mm

MK2A Heatbed 300x200mm
-9 % Discontinued
MK2A Heatbed 300x200mm
1 reviews - Write a review
32.99€
29.99€
Ex Tax: 24.79€
  • Stock: Discontinued
  • Model: MK2A-300x200

Available Options

Add to Cart
Buy Now
Add to Wish List Compare this Product
Product temporarily out of stock
This product is out of stock, we will try to replenish it as soon as possible, but due to the situation caused by the COVID-19 we cannot give an arrival forecast.

MK2b Heated Bed 300x200mm

The hot bed is responsible for heating the bottom of the 3D printer, so that the pieces remain adhered during printing. 

Thus the warping (parts bulge and come off during printing process) is avoided. 

More information: 

http://reprap.org/wiki/PCB_Heatbed

Write a review

Note: HTML is not translated!
Bad Good
Tags: Heated Bed, Electronic,
Quickview
25A Mosfet Module with heatsink and hot bed compatible 25A Mosfet Module with heatsink and hot bed compatible
-57 % Out of Stock
25A Mosfet Module with heatsink and hot bed compatible
You can control the current of devices or accessories, such as a hot bed, or different heaters:Maximum current: 25AVoltage: 12 / 24V 1 Piece..
14.00€ 5.99€ Ex Tax:4.95€
Add to Cart
Add to Wish List Compare this Product
Quickview
30A Mosfet Module with heatsink and hot bed compatible 30A Mosfet Module with heatsink and hot bed compatible
-40 % Out of Stock
30A Mosfet Module with heatsink and hot bed compatible
You can control the current of devices or accessories, such as a hot bed, or different heaters:Maximum current: 30AVoltage: 5 / 12 / 24V 1 Piece..
25.00€ 14.95€ Ex Tax:12.36€
Add to Cart
Add to Wish List Compare this Product
Quickview
ALU Heatbed MK3 ALU Heatbed MK3
Only a few units in stock -58 %
ALU Heatbed MK3
All features similar to MK2, you can also operate this board with 12 Volt or 24 Volt Heatbed with 3mm aluminum core. You can print directly on th..
25.99€ 10.90€ Ex Tax:9.01€
Add to Cart
Add to Wish List Compare this Product
Quickview
ALU Heatbed MK3 220x220 12v / 24v - With countersunk holes for screw head ALU Heatbed MK3 220x220 12v / 24v - With countersunk holes for screw head
-67 %
ALU Heatbed MK3 220x220 12v / 24v - With countersunk holes for screw head
All features similar to MK2 12v / 24v Volt.Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but no..
35.00€ 11.50€ Ex Tax:9.50€
Add to Cart
Add to Wish List Compare this Product
Quickview
ALU Heatbed MK3 220x280 12v - With countersunk holes for screw head ALU Heatbed MK3 220x280 12v - With countersunk holes for screw head
Only a few units in stock -52 %
ALU Heatbed MK3 220x280 12v - With countersunk holes for screw head
Hotbed size 220x280 With countersunk holes for screw head, compatible with most Y-axis carriages, including 220x220 or 214x214 bed carriages, because ..
45.00€ 21.50€ Ex Tax:17.77€
Add to Cart
Add to Wish List Compare this Product
Quickview
ALU Heatbed MK3 300x200 12v ALU Heatbed MK3 300x200 12v
-53 %
ALU Heatbed MK3 300x200 12v
All features similar to MK2 12 VoltHeatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory T..
49.99€ 23.50€ Ex Tax:19.42€
Add to Cart
Add to Wish List Compare this Product
Quickview
608zz Bearing 608zz Bearing
Hot Sales -68 %
608zz Bearing
Bearings 608zz standard, which are used in printers in the extruder “Greg’s wade” and its derivatives, and also used for the tensors in X-axis and Y-a..
0.99€ 0.32€ Ex Tax:0.26€
Add to Cart
Add to Wish List Compare this Product
Quickview
623zz Bearing 623zz Bearing
Hot Sales -69 %
623zz Bearing
623zz bearings used in printers mainly for X and Y axes.  Nominal dimensions:  Inside diameter: 3mm  Outside diameter: 10mm&..
0.93€ 0.29€ Ex Tax:0.24€
Add to Cart
Add to Wish List Compare this Product
Quickview
GT2 Timing Belt - 6mm - 1m GT2 Timing Belt - 6mm - 1m
Hot Sales -60 %
GT2 Timing Belt - 6mm - 1m
Belt GT2 for reprap, made of neoprene with reinforcerd fiberglass. Dimensions: Width: 6mm Step: 2mm Belt heigh: 1.38 mm Teeth..
2.99€ 1.20€ Ex Tax:0.99€
Add to Cart
Add to Wish List Compare this Product
Quickview
5x5 Zcoupler - Flexible coupler 5mm 5x5 Zcoupler - Flexible coupler 5mm
-62 %
5x5 Zcoupler - Flexible coupler 5mm
Coupler Shaft from 5mm to 5mm, commonly used for Z axis. Material: Aluminium Input and Output:  5mm Lenght: 25 mm Diameter: 2..
2.99€ 1.15€ Ex Tax:0.95€
Add to Cart
Add to Wish List Compare this Product
Quickview
Kapton Tape - Polyimide BGA 15mm Kapton Tape - Polyimide BGA 15mm
Hot Sales -67 %
Kapton Tape - Polyimide BGA 15mm
Polyimide tape BGA, electrically insulating and heat resistant. Dimensions: 15mmx33m High heat resistance: 280°C Adhesive silicone prot..
4.65€ 1.55€ Ex Tax:1.28€
Add to Cart
Add to Wish List Compare this Product
Quickview
Mega 2560 R3 (Compatible) 16u2
Only a few units in stock -40 %
Mega 2560 R3 (Compatible) 16u2
Mega 2560 R3 (Compatible) 16u2This is a clone of quality, not only just aesthetically , also uses the same chip USB connection so it is 100 % compatib..
24.99€ 14.95€ Ex Tax:12.36€
Add to Cart
Add to Wish List Compare this Product
Quickview
DRV8825 - Stepper Motor Driver Carrier, High Current - Driver DRV8825 - Stepper Motor Driver Carrier, High Current - Driver
Hot Sales -74 %
DRV8825 - Stepper Motor Driver Carrier, High Current - Driver
The DRV8828 is a driver for stepper motors, with a resolution of 1/32 steps. Datasheet: https://www.pololu.com/product/2133 Heatsink in..
8.99€ 2.33€ Ex Tax:1.93€
Add to Cart
Add to Wish List Compare this Product
Quickview
Kapton Tape - Polyimide BGA 15mm Kapton Tape - Polyimide BGA 15mm
Hot Sales -67 %
Kapton Tape - Polyimide BGA 15mm
Polyimide tape BGA, electrically insulating and heat resistant. Dimensions: 15mmx33m High heat resistance: 280°C Adhesive silicone prot..
4.65€ 1.55€ Ex Tax:1.28€
Add to Cart
Add to Wish List Compare this Product
Quickview
MK2B HeatBed 200x200mm 12v / 24v - Red or black MK2B HeatBed 200x200mm 12v / 24v - Red or black
-62 %
MK2B HeatBed 200x200mm 12v / 24v - Red or black
The hot bed is responsible for heating the bottom of the 3D printer, so that the pieces remain adhered during printing.Thus the warping (parts bulge..
17.99€ 6.80€ Ex Tax:5.62€
Add to Cart
Add to Wish List Compare this Product
Quickview
Thermistor 100K ohm NTC 3950 wired Thermistor 100K ohm NTC 3950 wired
Hot Sales Only a few units in stock -78 %
Thermistor 100K ohm NTC 3950 wired
Thermistor ideal for the Heated Bed or Hotend. 100K ohm NTC 3950 1m wire with dupont connector1 Piece..
3.20€ 0.69€ Ex Tax:0.57€
Add to Cart
Add to Wish List Compare this Product
Quickview
Borosilicate tempered glass 300x200x3mm
-50 %
Borosilicate tempered glass 300x200x3mm
The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to the..
16.99€ 8.50€ Ex Tax:7.02€
Add to Cart
Add to Wish List Compare this Product
Quickview
Bipolar wire - 1mm2 section - 1 meter length
Bipolar wire - 1mm2 section - 1 meter length
The price is for 1 meter, if you want consecutive meters we can offer up to 10 meters...
0.59€ Ex Tax:0.49€
Add to Cart
Add to Wish List Compare this Product
Quickview
Kapton Tape - Polyimide BGA 10mm Kapton Tape - Polyimide BGA 10mm
Hot Sales -74 %
Kapton Tape - Polyimide BGA 10mm
Polyimide tape BGA, electrically insulating and heat resistant. Dimensions: 10mmx33m High heat resistance: 280°C Adhesive silicone prot..
3.75€ 0.99€ Ex Tax:0.82€
Add to Cart
Add to Wish List Compare this Product