-67 %
Stock: In Stock
Model: Mk3-220x220-12/24v
All features similar to MK2 12v / 24v Volt.Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend insulating the bottom side with Thermal Insula..
35.00€ 11.50€
Ex Tax:9.50€
Only a few units in stock
-52 %
Stock: In Stock
Model: Mk3-220x280
Hotbed size 220x280 With countersunk holes for screw head, compatible with most Y-axis carriages, including 220x220 or 214x214 bed carriages, because of it has exactly the same spacing between holes (209mm).All features similar to MK2 12 VoltHeatbed with 3mm aluminum core. You can print directly on ..
45.00€ 21.50€
Ex Tax:17.77€
-53 %
Stock: In Stock
Model: Mk3-300x200
All features similar to MK2 12 VoltHeatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend insulating the bottom side with Thermal InsulatorDual power..
49.99€ 23.50€
Ex Tax:19.42€
Only a few units in stock
-19 %
Stock: In Stock
Model: Mk3-300x300-24v
Caution! This bed has a very high power, it can damage the electronics or the power supply if it is not dimensioned correctly.We advise to regulate the power by firmware adjusting this line:#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current 127= 50%So it doesn't overlo..
55.00€ 44.50€
Ex Tax:36.78€
-33 %
Stock: In Stock
Model: SHF10
Support for 10mm rods or shafts, used for both 3D printers and CNC machines.Material: Aluminium1 Piece..
3.50€ 2.35€
Ex Tax:1.94€
-38 %
Stock: In Stock
Model: SHF12
Support for 12mm rods or shafts, used for both 3D printers and CNC machines.Material: Aluminium1 Piece..
4.00€ 2.50€
Ex Tax:2.07€
-34 %
Stock: In Stock
Model: SHF8
Support for 8mm rods or shafts, used for both 3D printers and CNC machines.Material: Aluminium1 Piece..
3.50€ 2.32€
Ex Tax:1.92€
-68 %
Stock: In Stock
Model: SK10
Support for 10mm rods or shafts, used for both 3D printers and CNC machines.Material: Aluminium1 Piece..
3.10€ 0.99€
Ex Tax:0.82€
-66 %
Out of Stock
Stock: Out of Stock
Model: SK12
Support for 12mm rods or shafts, used for both 3D printers and CNC machines.Material: Aluminium1 Piece..
3.20€ 1.09€
Ex Tax:0.90€
Hot Sales
-70 %
Stock: In Stock
Model: SK8
Support for 8mm rods or shafts, used for both 3D printers and CNC machines.Material: Aluminium1 Piece..
3.00€ 0.89€
Ex Tax:0.74€
-29 %
Out of Stock
Stock: Out of Stock
Model: HEVO-Perfiles Aluminio
Slotted aluminum profile kit for mounting a HyperCube Evolution, a popular 3D Core XY printer model. This model is completely open source and there are many variants, this combination is for a version of volume 30 x 30 x 30 cm approximately, the final print volume may vary depending on the moun..
75.00€ 53.00€
Ex Tax:43.80€
New
Only a few units in stock
-11 %
Stock: In Stock
Model: ASA-WINKLE
The Winkle ASA filament is manufactured in Spain for 3D printers with FFF/FDM technology. ASA is acrylonitrile styrene acrylic, a thermoplastic developed as an alternative to ABS.It improves with respect to the ABS the resistance to the outdoors with high resistance to the UV rays maintaining all it..
12.95€ 11.50€
Ex Tax:9.50€