-65 %
Stock: In Stock
Model: Rigid-8x8
Rigid coupler Shaft from 8mm to 8mm, commonly used for Z axis. Material: Aluminium Input: 8mm Output: 8mm Lenght: 25 mm Diameter: 14 mm 1 Piece ..
2.75€ 0.95€
Ex Tax:0.79€
Hot Sales
Only a few units in stock
-43 %
Stock: In Stock
Model: A4988
It is one of the most popular stepper motor controllers, its high performance and low cost makes it ideal for any 3D printer or CNC that use currents lower than 2A.Characteristics: Low resistance Short circuit and overheat protections Rated current 2A Step modes: 1/16, 1/8, 1/4, ..
3.50€ 1.99€
Ex Tax:1.64€
Only a few units in stock
-31 %
Stock: In Stock
Model: ABS-3D-Filament-1.75mm
PLA (polylactic acid) is a biodegradable polymer derived from renewable resources. It has gained much popularity in 3D printing. Extrusion temperature around 220°C - 250°C Recommended temperature hot bed 70 - 100ªC Diameter: 1.75 mm ± 0.10 Reel: Gross weight: 1.25 kg&nb..
20.00€ 13.75€
Ex Tax:11.36€
-50 %
Stock: In Stock
Model: ABS 1.75mm
ABS (Acrylonitrile Butadiene Styrene) is a thermoplastic commonly used in multiple applications, including Lego bricks. Until the appearance of the PLA, the ABS was the material used in 3D printing.Raw material: Chi Mei PA-757/747R Polylac® ABS *Extrusion temperature of about 235 ° C - 256 ° CWe rec..
30.19€ 14.99€
Ex Tax:12.39€
-250x250.jpg "ABS Filament HI - Hight Impact - 1,75mm - Materials 3D / WINKLE")
Only a few units in stock
-17 %
Stock: In Stock
Model: ABS-HI-1.75mm
Characteristics: This material is a high impact ABS. With this ABS you'll be able to create durable parts, either wear parts subjected to continuous friction (gear), or parts that will suffer tensile (tension). It has the perfect qualities to print parts with mechanical characteristic..
9.00€ 7.45€
Ex Tax:6.16€
Only a few units in stock
-50 %
Stock: In Stock
Model: Pie D50-M8-50
Support to adjust horizontally the height of your 3D printer or other machines. The base is a non-slip rubber.Specifications:Base material: reinforced nylon.Screw material: steel.Diameter of the base: 50mmScrew: M8Screw length: 50 mm1 unit..
2.00€ 1.00€
Ex Tax:0.83€
-50 %
Stock: In Stock
Model: Airtripper Bowden BSP
Composition:
-Printed parts (ABS)
-MK8
Drive Gear
-Bearings:
1 x 608zz
1 x MR105ZZ
-Hardware:
4 x M3 Washers
4 x M3 Nuts
1 x M3 25mm
2 x M3 30mm
1 x M3 6mm
..
16.93€ 8.50€
Ex Tax:7.02€
-36 %
Out of Stock
Stock: Out of Stock
Model: Hotend-V5-1.75mm
Advantages: It can print any material: From PLA, due to it thermical barrier made of stainless steel and its dissipation with forced ventilation, to Nylon, Polycarbonate, Polyoxymethylene y others thermoplastics which need higher temperatures. And also, as it is natural, it can print ..
32.95€ 21.00€
Ex Tax:17.36€
-36 %
Out of Stock
Stock: Out of Stock
Model: Hotend-V5-3mm
Advantages: It can print any material: From PLA, due to it thermical barrier made of stainless steel and its dissipation with forced ventilation, to Nylon, Polycarbonate, Polyoxymethylene y others thermoplastics which need higher temperatures. And also, as it is natural, it can print ..
32.95€ 21.00€
Ex Tax:17.36€
-68 %
Stock: In Stock
Model: Hotend-V6-1.75mm
Advantages:
It can print any material: From PLA, due to it thermical
barrier made of stainless steel and its dissipation with
forced ventilation, to Nylon, Polycarbonate, Polyoxymethylene y
others thermoplastics which need higher temperatures. And also, as
it is natural..
59.95€ 18.95€
Ex Tax:15.66€
-69 %
Stock: In Stock
Model: Hotend-V6-1.75-PT100Termistor
The main advantage of this Hotend with respect to the conventional V6 is the change of the heating block and thermistor.It is an encapsulated thermistor, which makes it more resistant to deterioration and breakage.Also, as an insulator, use a silicone sock specially adapted for the heating block. Th..
69.99€ 21.50€
Ex Tax:17.77€
Only a few units in stock
-58 %
Stock: In Stock
Model: Mk3
All features similar to MK2, you can also operate this board with 12 Volt or 24 Volt Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend..
25.99€ 10.90€
Ex Tax:9.01€