Hot Sales
-33 %
Stock: In Stock
Model: T 30-M5
T-nut or hammer shaped, is one of the most used in the aluminum profile system.It is inserted by the profile directly into the slot, rotates 90 degrees clockwise and is positioned and fixed, resulting in a simple and convenient installation.Dimensions:
D
L
H
..
0.12€ 0.08€
Ex Tax:0.07€
Only a few units in stock
-30 %
Stock: In Stock
Model: Tuerca ranura 30-M5
Sliding T-slot nut is inserted only from the end of the profile. It has excellent resistance and connection reliability.Material: nickel-plated carbon steel.Dimensions: ABCDE30 M51616862 Weight: 8.2gMinimum order: 5 unidades1 unit..
0.50€ 0.35€
Ex Tax:0.29€
Hot Sales
-87 %
Stock: In Stock
Model: Teflon-tube-4/2-10cm
It is used for extruder systems based on Bowden.Nominal dimensions:Inside diameter: 2mmOutside diameter: 4mmThe price is per 10cm, if you want it cut to 70cm please select 7 units.We can sell continuous pieces up to 25 meters...
0.70€ 0.09€
Ex Tax:0.07€
Hot Sales
-83 %
Stock: In Stock
Model: Teflon-tube-6/4-10cm
It is used for extruder systems based on Bowden. Nominal dimensions: Inside diameter: 4mm Outside diameter: 6mm The price is per 10cm, if you want it cut to 70cm please select 7 units. We can sell continuous pieces up to 10 meters. ..
0.70€ 0.12€
Ex Tax:0.10€
-27 %
5 - 10 Days
Stock: 5 - 10 Days
Model: Terminal FDD2-187
Terminal FDD2-187 for cable for crumping.For 1.5 to 2.5 mm² wires.With protective cover.Minimum order: 10 unitsPrice for 1 unit..
0.25€ 0.18€
Ex Tax:0.15€
-43 %
Out of Stock
Stock: Out of Stock
Model: TFT24-V1.1
Very versatile graphic display, as it can be connected in two ways at the same time:It can be connected as an external screen, using the pins TX and RX (black cable) so that you have the touch menu. This connection can be used to decrease the load on the processor.You can connect the two flat cables..
35.00€ 19.99€
Ex Tax:16.52€
-18 %
Out of Stock
Stock: Out of Stock
Model: TFT35-V3.0
Very versatile graphic display, as it can be connected in two ways at the same time:It can be connected as an external screen, using the pins TX and RX (black cable) so that you have the touch menu. This connection can be used to decrease the load on the processor.You can connect the two flat cables..
50.00€ 40.99€
Ex Tax:33.88€
New
-7 %
Stock: In Stock
Model: TFT81050
Current Version: 1.05 inch TFT81050 touch smart screen. Compatible with Marlin 2.0.Compatible with Luzbot CLCD S6 3D printer parts.Characteristics:Based on the FT810 FTDI / BridgetekEVE ChipCompatible with Luzbot CLCD!Marlin 2.0 compatibleIntegrated SD card socket (compatible with vertical SD module..
60.00€ 55.75€
Ex Tax:46.07€
Hot Sales
-22 %
Stock: In Stock
Model: Aislante-Térmico
Thermal Insulation for Heated Bed It is composed of 3 layers:Aluminium that acts as a thermal refractory.Air chamber to avoid thermal conduction.Another layer of aluminium.Aluminium acts as an electrical conductor if it comes into contact with circuits, so it is advisable to cover the areas tha..
2.50€ 1.95€
Ex Tax:1.61€
Hot Sales
Stock: In Stock
Model: Thermal-paste-6g
It is commonly used to increase performance in Hotends All metal , is applied between the throat and the heat sink. Pre - applied in our hotend V6. Specifications: White colour Operating temperature: -50/180°C Evaporation : < 0.001 % Thermal Conductivity: >1.22 W/..
0.25€
Ex Tax:0.21€
-73 %
Out of Stock
Stock: Out of Stock
Model: Termistor100K ohm NTC 3950-PT100-3mm
Thermistor ideal for the Hotend. 100K ohm NTC 3950 1m wire with dupont connectorDurable 304 stainless steel capsuleDiameter 3mmDoes not need additional electronics (unlike a thermocouple)Greater precision than the normal thermistor.Maximum temperature 350ºC1 Piece..
5.00€ 1.35€
Ex Tax:1.12€
Hot Sales
Only a few units in stock
-78 %
Stock: In Stock
Model: Termistor100K ohm NTC 3950
Thermistor ideal for the Heated Bed or Hotend. 100K ohm NTC 3950 1m wire with dupont connector1 Piece..
3.20€ 0.69€
Ex Tax:0.57€