-68 %
Stock: In Stock
Model: 626ZZ
Nominal dimensions:
Inside diameter: 6mm
Outside diameter: 19mm
Thickness: 6mm
1 Piece ..
1.21€ 0.39€
Ex Tax:0.32€
Hot Sales
-76 %
Stock: In Stock
Model: 688ZZ
Nominal dimensions:
Inside diameter: 8mm
Outside diameter: 16mm
Thickness: 5mm
1 Piece ..
1.21€ 0.29€
Ex Tax:0.24€
-65 %
Stock: In Stock
Model: Rigid-8x8
Rigid coupler Shaft from 8mm to 8mm, commonly used for Z axis. Material: Aluminium Input: 8mm Output: 8mm Lenght: 25 mm Diameter: 14 mm 1 Piece ..
2.75€ 0.95€
Ex Tax:0.79€
Hot Sales
Only a few units in stock
-43 %
Stock: In Stock
Model: A4988
It is one of the most popular stepper motor controllers, its high performance and low cost makes it ideal for any 3D printer or CNC that use currents lower than 2A.Characteristics: Low resistance Short circuit and overheat protections Rated current 2A Step modes: 1/16, 1/8, 1/4, ..
3.50€ 1.99€
Ex Tax:1.64€
Only a few units in stock
-31 %
Stock: In Stock
Model: ABS-3D-Filament-1.75mm
PLA (polylactic acid) is a biodegradable polymer derived from renewable resources. It has gained much popularity in 3D printing. Extrusion temperature around 220°C - 250°C Recommended temperature hot bed 70 - 100ªC Diameter: 1.75 mm ± 0.10 Reel: Gross weight: 1.25 kg&nb..
20.00€ 13.75€
Ex Tax:11.36€
-50 %
Stock: In Stock
Model: ABS 1.75mm
ABS (Acrylonitrile Butadiene Styrene) is a thermoplastic commonly used in multiple applications, including Lego bricks. Until the appearance of the PLA, the ABS was the material used in 3D printing.Raw material: Chi Mei PA-757/747R Polylac® ABS *Extrusion temperature of about 235 ° C - 256 ° CWe rec..
30.19€ 14.99€
Ex Tax:12.39€
-250x250.jpg "ABS Filament HI - Hight Impact - 1,75mm - Materials 3D / WINKLE")
Only a few units in stock
-17 %
Stock: In Stock
Model: ABS-HI-1.75mm
Characteristics: This material is a high impact ABS. With this ABS you'll be able to create durable parts, either wear parts subjected to continuous friction (gear), or parts that will suffer tensile (tension). It has the perfect qualities to print parts with mechanical characteristic..
9.00€ 7.45€
Ex Tax:6.16€
Stock: In Stock
Model: Marco-Rework
Acrylic Frame (10mm):
Laser cut of a high quality sheet of acrylic.
Two possible bearing configurations of heated bed: 3 or 4
bearings.
Two possible support configurations for heated
bed: 3 or 4 points of support. ..
49.99€
Ex Tax:41.31€
Only a few units in stock
-50 %
Stock: In Stock
Model: Pie D50-M8-50
Support to adjust horizontally the height of your 3D printer or other machines. The base is a non-slip rubber.Specifications:Base material: reinforced nylon.Screw material: steel.Diameter of the base: 50mmScrew: M8Screw length: 50 mm1 unit..
2.00€ 1.00€
Ex Tax:0.83€
-50 %
Stock: In Stock
Model: Airtripper Bowden BSP
Composition:
-Printed parts (ABS)
-MK8
Drive Gear
-Bearings:
1 x 608zz
1 x MR105ZZ
-Hardware:
4 x M3 Washers
4 x M3 Nuts
1 x M3 25mm
2 x M3 30mm
1 x M3 6mm
..
16.93€ 8.50€
Ex Tax:7.02€
-36 %
Out of Stock
Stock: Out of Stock
Model: Hotend-V5-1.75mm
Advantages: It can print any material: From PLA, due to it thermical barrier made of stainless steel and its dissipation with forced ventilation, to Nylon, Polycarbonate, Polyoxymethylene y others thermoplastics which need higher temperatures. And also, as it is natural, it can print ..
32.95€ 21.00€
Ex Tax:17.36€
-36 %
Out of Stock
Stock: Out of Stock
Model: Hotend-V5-3mm
Advantages: It can print any material: From PLA, due to it thermical barrier made of stainless steel and its dissipation with forced ventilation, to Nylon, Polycarbonate, Polyoxymethylene y others thermoplastics which need higher temperatures. And also, as it is natural, it can print ..
32.95€ 21.00€
Ex Tax:17.36€